2022-07-04 16:51:34 +02:00
|
|
|
|
using System.Diagnostics.CodeAnalysis;
|
|
|
|
|
|
using System.Linq;
|
Adds atmos (#1389)
* Add initial atmospherics framework
* Make walls and airlocks airtight
* Add the basic atmosphere gas system
* Atmos: move CardinalToIntVec and Offset into extention methods in EntityNetworkUtils
* Optimize vending machine code a bit.
* Address feedback from Atmos PR, make code compile
Fix use of OnMove -> SnapGridComponent.OnPositionChanged.
Added pause checking to atmos simulations.
* Improvements to the existing ZAS prototype (#996)
* Rename Volume -> Quantity in GasProperty
This makes the name consistent with the rest of the code, given that
it's meant to be a mol value.
* Replace Gas enum with GasPrototype
Unused as of yet, but laying the groundwork for future changes.
* Update AtmosphereMap, improving maths
Adds a temporary default atmosphere, hardcoded in for testing. It will
be replaced eventually.
Fixed a maths mistake in the original code involving unit conversions.
Added the Take() method to IAtmosphere, for taking some volume of
mixture out of a gas mix. This will be pretty handy in the future, but
for now it's used by walls to delete air where they are built.
* Fix merging, splitting logic for zones
Removing a cell from a zone now correctly reduces its volume.
Adding a cell to a zone now correctly increases its volume.
* Improvements to atmos code, reorganising of types
Moved GasPrototype to shared, because it's going to be used by the
client later.
Split up the atmosphere code. Now zones are explicitly their own kind of
atmosphere, which should speed up some loops and also solve
inconsistencies in the volume calculation.
GasMixtures are another type of atmosphere, for more general use.
Try to fix the splitting/merging code, which was quite cryptic and not
clear at all. It *should* work now.
* Switch zones back to MapIndices
Turns out I'm an idiot who misunderstood the code. MapIndices can be
used as one-per-tile, which is what is needed for atmos. GridCoordinates
are many-per-tile, and were causing lots of problems.
* Add zone debugging overlay
This is the first example of zone information being sent to a client.
It adds the `togglezoneinfo` command, which overlays the tiles and gas
information for the zone currently occupied by the user on the screen.
This was helpful for debugging the GridCoordinates problem.
* Fix position of atmos zone debug text
* Make AirtightComponent only activate on MapInit
This should stop it splitting atmospheres in mapping.
* Doc comments improvements to AtmosphereMap
Fix some malformed comments, inherit some useful docs, document some
more functions.
* Add zone logic for changing tiles to/from space
Zones are now correctly created when all the tiles in a room are built,
and destroyed when one of the tiles is destroyed.
* update engine
* right
* Cleanup code
* Port GasMixture, further cleanup
* Fix windows not being airtight, some other stuff
* Work on atmos
* Difference between ZoneBlocked and AirBlocked
* Big GridAtmosphereManager cleanup, zones are broken now oops
* Remove zones, add excited group implementation
* Further cleanup
* Further work on atmos
* Work on gas overlay.
* PumpGasTo and ReleaseGasTo methods for GasMixture.
* Adds Tile Overlay System.
* More work on atmos
* Gasses spread, equalize and all that
* Fix a few crashes
* Gas can actually spread from room to room after opening airlocks
* Add explosive depressurization, tile prying on depressurization, gas spreading on wall break. Etc.
* More work
* Remove atmoschem, add "performant" gas overlays
* what the fuck git
* More work I guess?
* Fix stuff, create a few (empty) components for future work
* Fix temperature
* Fix tile air sharing
* Atmos optimizations
* Further atmos optimizations
* Even more optimizations!
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Address a few reviews
* Oops, forgot to remove this
* Update Content.Server/Atmos/AtmosphereMap.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Fix compile
* Improved client gas tile overlays
* Less allocations
* Even less allocations!
* some stuff dunno
* Big refactor time, oh yeah
* it truly is 1 AM
* bruh
* No idea why now it doesn't work.
Oh well! I'll fix this on thursday :relieved:
* Basic atmos serialization
* Fix bugs, add VV attributes
* Start adding stuff for gas reactions
* Add a few atmos commands
* Fill gas command
* Changes to gas opacity
* Fixes I guess
* Fixes, add space wind sound
* High pressure movement!
* Better high pressure movements.
* Fix direction, maybe?
* And now it works great
* Science!
* and this is why you don't trust people
* remove logging
* Turns out I'm fucking dumb
* Work on hotspots and reactions, add tritium gas
* IGridAtmosphereComponent interface! For future unsimulated grids.
* Makes atmos updates NoGC.
* C E A S E
* Add settemp atmos command
* Important reminder.
* Remove useless AtmosCooldown.
* More work on hotspots
* Overlays for hotspots. Fire works!
* Turns out I suck at coding
* Fire texture change
* Yeah let's make that an absolute value, hmm?
* Support for atmos after teleporting grid (more or less)
* fix attempt (doesn't actually fix it)
* Make static variable not static
* Remove magic numbers
* Stopwatch moment
* Slight cleanup.
* More cleanup.
* Atmos optimizations
* Fix build
* Remove useless ghost atmos shit
* Adds CanSeeGases component for gas overlay stuff
* Component and prototype ignores
* ExcitedGroups now dispose on being merged with others
* Some tweaking.
* Atmos now uses frame time for updates.
* Nullable boogaloo
* IExamine fix
* Fix build
* Fix restartround
* Atmos tweaking, use invalid direction
* Increase high pressure movement force
* Better sort
* Update submodule.
* NULLABILITY AAAAH
Special thanks to monster860 and all monstermos contributors!
Co-authored-by: Campbell Suter <znix@znix.xyz>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
Co-authored-by: ComicIronic <comicironic@gmail.com>
Co-authored-by: silicons <2003111+silicons@users.noreply.github.com>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
2020-08-02 20:08:20 +02:00
|
|
|
|
using System.Runtime.CompilerServices;
|
2022-07-04 16:51:34 +02:00
|
|
|
|
using Content.Server.Atmos.EntitySystems;
|
Adds atmos (#1389)
* Add initial atmospherics framework
* Make walls and airlocks airtight
* Add the basic atmosphere gas system
* Atmos: move CardinalToIntVec and Offset into extention methods in EntityNetworkUtils
* Optimize vending machine code a bit.
* Address feedback from Atmos PR, make code compile
Fix use of OnMove -> SnapGridComponent.OnPositionChanged.
Added pause checking to atmos simulations.
* Improvements to the existing ZAS prototype (#996)
* Rename Volume -> Quantity in GasProperty
This makes the name consistent with the rest of the code, given that
it's meant to be a mol value.
* Replace Gas enum with GasPrototype
Unused as of yet, but laying the groundwork for future changes.
* Update AtmosphereMap, improving maths
Adds a temporary default atmosphere, hardcoded in for testing. It will
be replaced eventually.
Fixed a maths mistake in the original code involving unit conversions.
Added the Take() method to IAtmosphere, for taking some volume of
mixture out of a gas mix. This will be pretty handy in the future, but
for now it's used by walls to delete air where they are built.
* Fix merging, splitting logic for zones
Removing a cell from a zone now correctly reduces its volume.
Adding a cell to a zone now correctly increases its volume.
* Improvements to atmos code, reorganising of types
Moved GasPrototype to shared, because it's going to be used by the
client later.
Split up the atmosphere code. Now zones are explicitly their own kind of
atmosphere, which should speed up some loops and also solve
inconsistencies in the volume calculation.
GasMixtures are another type of atmosphere, for more general use.
Try to fix the splitting/merging code, which was quite cryptic and not
clear at all. It *should* work now.
* Switch zones back to MapIndices
Turns out I'm an idiot who misunderstood the code. MapIndices can be
used as one-per-tile, which is what is needed for atmos. GridCoordinates
are many-per-tile, and were causing lots of problems.
* Add zone debugging overlay
This is the first example of zone information being sent to a client.
It adds the `togglezoneinfo` command, which overlays the tiles and gas
information for the zone currently occupied by the user on the screen.
This was helpful for debugging the GridCoordinates problem.
* Fix position of atmos zone debug text
* Make AirtightComponent only activate on MapInit
This should stop it splitting atmospheres in mapping.
* Doc comments improvements to AtmosphereMap
Fix some malformed comments, inherit some useful docs, document some
more functions.
* Add zone logic for changing tiles to/from space
Zones are now correctly created when all the tiles in a room are built,
and destroyed when one of the tiles is destroyed.
* update engine
* right
* Cleanup code
* Port GasMixture, further cleanup
* Fix windows not being airtight, some other stuff
* Work on atmos
* Difference between ZoneBlocked and AirBlocked
* Big GridAtmosphereManager cleanup, zones are broken now oops
* Remove zones, add excited group implementation
* Further cleanup
* Further work on atmos
* Work on gas overlay.
* PumpGasTo and ReleaseGasTo methods for GasMixture.
* Adds Tile Overlay System.
* More work on atmos
* Gasses spread, equalize and all that
* Fix a few crashes
* Gas can actually spread from room to room after opening airlocks
* Add explosive depressurization, tile prying on depressurization, gas spreading on wall break. Etc.
* More work
* Remove atmoschem, add "performant" gas overlays
* what the fuck git
* More work I guess?
* Fix stuff, create a few (empty) components for future work
* Fix temperature
* Fix tile air sharing
* Atmos optimizations
* Further atmos optimizations
* Even more optimizations!
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Address a few reviews
* Oops, forgot to remove this
* Update Content.Server/Atmos/AtmosphereMap.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Fix compile
* Improved client gas tile overlays
* Less allocations
* Even less allocations!
* some stuff dunno
* Big refactor time, oh yeah
* it truly is 1 AM
* bruh
* No idea why now it doesn't work.
Oh well! I'll fix this on thursday :relieved:
* Basic atmos serialization
* Fix bugs, add VV attributes
* Start adding stuff for gas reactions
* Add a few atmos commands
* Fill gas command
* Changes to gas opacity
* Fixes I guess
* Fixes, add space wind sound
* High pressure movement!
* Better high pressure movements.
* Fix direction, maybe?
* And now it works great
* Science!
* and this is why you don't trust people
* remove logging
* Turns out I'm fucking dumb
* Work on hotspots and reactions, add tritium gas
* IGridAtmosphereComponent interface! For future unsimulated grids.
* Makes atmos updates NoGC.
* C E A S E
* Add settemp atmos command
* Important reminder.
* Remove useless AtmosCooldown.
* More work on hotspots
* Overlays for hotspots. Fire works!
* Turns out I suck at coding
* Fire texture change
* Yeah let's make that an absolute value, hmm?
* Support for atmos after teleporting grid (more or less)
* fix attempt (doesn't actually fix it)
* Make static variable not static
* Remove magic numbers
* Stopwatch moment
* Slight cleanup.
* More cleanup.
* Atmos optimizations
* Fix build
* Remove useless ghost atmos shit
* Adds CanSeeGases component for gas overlay stuff
* Component and prototype ignores
* ExcitedGroups now dispose on being merged with others
* Some tweaking.
* Atmos now uses frame time for updates.
* Nullable boogaloo
* IExamine fix
* Fix build
* Fix restartround
* Atmos tweaking, use invalid direction
* Increase high pressure movement force
* Better sort
* Update submodule.
* NULLABILITY AAAAH
Special thanks to monster860 and all monstermos contributors!
Co-authored-by: Campbell Suter <znix@znix.xyz>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
Co-authored-by: ComicIronic <comicironic@gmail.com>
Co-authored-by: silicons <2003111+silicons@users.noreply.github.com>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
2020-08-02 20:08:20 +02:00
|
|
|
|
using Content.Server.Atmos.Reactions;
|
|
|
|
|
|
using Content.Shared.Atmos;
|
|
|
|
|
|
using Robust.Shared.Serialization;
|
|
|
|
|
|
|
|
|
|
|
|
namespace Content.Server.Atmos
|
|
|
|
|
|
{
|
|
|
|
|
|
/// <summary>
|
|
|
|
|
|
/// A general-purpose, variable volume gas mixture.
|
|
|
|
|
|
/// </summary>
|
|
|
|
|
|
[Serializable]
|
2021-03-05 01:08:38 +01:00
|
|
|
|
[DataDefinition]
|
2022-04-24 13:54:25 +10:00
|
|
|
|
public sealed class GasMixture : IEquatable<GasMixture>, ISerializationHooks
|
Adds atmos (#1389)
* Add initial atmospherics framework
* Make walls and airlocks airtight
* Add the basic atmosphere gas system
* Atmos: move CardinalToIntVec and Offset into extention methods in EntityNetworkUtils
* Optimize vending machine code a bit.
* Address feedback from Atmos PR, make code compile
Fix use of OnMove -> SnapGridComponent.OnPositionChanged.
Added pause checking to atmos simulations.
* Improvements to the existing ZAS prototype (#996)
* Rename Volume -> Quantity in GasProperty
This makes the name consistent with the rest of the code, given that
it's meant to be a mol value.
* Replace Gas enum with GasPrototype
Unused as of yet, but laying the groundwork for future changes.
* Update AtmosphereMap, improving maths
Adds a temporary default atmosphere, hardcoded in for testing. It will
be replaced eventually.
Fixed a maths mistake in the original code involving unit conversions.
Added the Take() method to IAtmosphere, for taking some volume of
mixture out of a gas mix. This will be pretty handy in the future, but
for now it's used by walls to delete air where they are built.
* Fix merging, splitting logic for zones
Removing a cell from a zone now correctly reduces its volume.
Adding a cell to a zone now correctly increases its volume.
* Improvements to atmos code, reorganising of types
Moved GasPrototype to shared, because it's going to be used by the
client later.
Split up the atmosphere code. Now zones are explicitly their own kind of
atmosphere, which should speed up some loops and also solve
inconsistencies in the volume calculation.
GasMixtures are another type of atmosphere, for more general use.
Try to fix the splitting/merging code, which was quite cryptic and not
clear at all. It *should* work now.
* Switch zones back to MapIndices
Turns out I'm an idiot who misunderstood the code. MapIndices can be
used as one-per-tile, which is what is needed for atmos. GridCoordinates
are many-per-tile, and were causing lots of problems.
* Add zone debugging overlay
This is the first example of zone information being sent to a client.
It adds the `togglezoneinfo` command, which overlays the tiles and gas
information for the zone currently occupied by the user on the screen.
This was helpful for debugging the GridCoordinates problem.
* Fix position of atmos zone debug text
* Make AirtightComponent only activate on MapInit
This should stop it splitting atmospheres in mapping.
* Doc comments improvements to AtmosphereMap
Fix some malformed comments, inherit some useful docs, document some
more functions.
* Add zone logic for changing tiles to/from space
Zones are now correctly created when all the tiles in a room are built,
and destroyed when one of the tiles is destroyed.
* update engine
* right
* Cleanup code
* Port GasMixture, further cleanup
* Fix windows not being airtight, some other stuff
* Work on atmos
* Difference between ZoneBlocked and AirBlocked
* Big GridAtmosphereManager cleanup, zones are broken now oops
* Remove zones, add excited group implementation
* Further cleanup
* Further work on atmos
* Work on gas overlay.
* PumpGasTo and ReleaseGasTo methods for GasMixture.
* Adds Tile Overlay System.
* More work on atmos
* Gasses spread, equalize and all that
* Fix a few crashes
* Gas can actually spread from room to room after opening airlocks
* Add explosive depressurization, tile prying on depressurization, gas spreading on wall break. Etc.
* More work
* Remove atmoschem, add "performant" gas overlays
* what the fuck git
* More work I guess?
* Fix stuff, create a few (empty) components for future work
* Fix temperature
* Fix tile air sharing
* Atmos optimizations
* Further atmos optimizations
* Even more optimizations!
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Address a few reviews
* Oops, forgot to remove this
* Update Content.Server/Atmos/AtmosphereMap.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Fix compile
* Improved client gas tile overlays
* Less allocations
* Even less allocations!
* some stuff dunno
* Big refactor time, oh yeah
* it truly is 1 AM
* bruh
* No idea why now it doesn't work.
Oh well! I'll fix this on thursday :relieved:
* Basic atmos serialization
* Fix bugs, add VV attributes
* Start adding stuff for gas reactions
* Add a few atmos commands
* Fill gas command
* Changes to gas opacity
* Fixes I guess
* Fixes, add space wind sound
* High pressure movement!
* Better high pressure movements.
* Fix direction, maybe?
* And now it works great
* Science!
* and this is why you don't trust people
* remove logging
* Turns out I'm fucking dumb
* Work on hotspots and reactions, add tritium gas
* IGridAtmosphereComponent interface! For future unsimulated grids.
* Makes atmos updates NoGC.
* C E A S E
* Add settemp atmos command
* Important reminder.
* Remove useless AtmosCooldown.
* More work on hotspots
* Overlays for hotspots. Fire works!
* Turns out I suck at coding
* Fire texture change
* Yeah let's make that an absolute value, hmm?
* Support for atmos after teleporting grid (more or less)
* fix attempt (doesn't actually fix it)
* Make static variable not static
* Remove magic numbers
* Stopwatch moment
* Slight cleanup.
* More cleanup.
* Atmos optimizations
* Fix build
* Remove useless ghost atmos shit
* Adds CanSeeGases component for gas overlay stuff
* Component and prototype ignores
* ExcitedGroups now dispose on being merged with others
* Some tweaking.
* Atmos now uses frame time for updates.
* Nullable boogaloo
* IExamine fix
* Fix build
* Fix restartround
* Atmos tweaking, use invalid direction
* Increase high pressure movement force
* Better sort
* Update submodule.
* NULLABILITY AAAAH
Special thanks to monster860 and all monstermos contributors!
Co-authored-by: Campbell Suter <znix@znix.xyz>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
Co-authored-by: ComicIronic <comicironic@gmail.com>
Co-authored-by: silicons <2003111+silicons@users.noreply.github.com>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
2020-08-02 20:08:20 +02:00
|
|
|
|
{
|
2021-06-23 11:35:30 +02:00
|
|
|
|
public static GasMixture SpaceGas => new() {Volume = Atmospherics.CellVolume, Temperature = Atmospherics.TCMB, Immutable = true};
|
2020-10-26 23:19:46 +01:00
|
|
|
|
|
2020-11-25 10:48:49 +01:00
|
|
|
|
// This must always have a length that is a multiple of 4 for SIMD acceleration.
|
2021-06-23 11:35:30 +02:00
|
|
|
|
[DataField("moles")] [ViewVariables]
|
|
|
|
|
|
public float[] Moles = new float[Atmospherics.AdjustedNumberOfGases];
|
Adds atmos (#1389)
* Add initial atmospherics framework
* Make walls and airlocks airtight
* Add the basic atmosphere gas system
* Atmos: move CardinalToIntVec and Offset into extention methods in EntityNetworkUtils
* Optimize vending machine code a bit.
* Address feedback from Atmos PR, make code compile
Fix use of OnMove -> SnapGridComponent.OnPositionChanged.
Added pause checking to atmos simulations.
* Improvements to the existing ZAS prototype (#996)
* Rename Volume -> Quantity in GasProperty
This makes the name consistent with the rest of the code, given that
it's meant to be a mol value.
* Replace Gas enum with GasPrototype
Unused as of yet, but laying the groundwork for future changes.
* Update AtmosphereMap, improving maths
Adds a temporary default atmosphere, hardcoded in for testing. It will
be replaced eventually.
Fixed a maths mistake in the original code involving unit conversions.
Added the Take() method to IAtmosphere, for taking some volume of
mixture out of a gas mix. This will be pretty handy in the future, but
for now it's used by walls to delete air where they are built.
* Fix merging, splitting logic for zones
Removing a cell from a zone now correctly reduces its volume.
Adding a cell to a zone now correctly increases its volume.
* Improvements to atmos code, reorganising of types
Moved GasPrototype to shared, because it's going to be used by the
client later.
Split up the atmosphere code. Now zones are explicitly their own kind of
atmosphere, which should speed up some loops and also solve
inconsistencies in the volume calculation.
GasMixtures are another type of atmosphere, for more general use.
Try to fix the splitting/merging code, which was quite cryptic and not
clear at all. It *should* work now.
* Switch zones back to MapIndices
Turns out I'm an idiot who misunderstood the code. MapIndices can be
used as one-per-tile, which is what is needed for atmos. GridCoordinates
are many-per-tile, and were causing lots of problems.
* Add zone debugging overlay
This is the first example of zone information being sent to a client.
It adds the `togglezoneinfo` command, which overlays the tiles and gas
information for the zone currently occupied by the user on the screen.
This was helpful for debugging the GridCoordinates problem.
* Fix position of atmos zone debug text
* Make AirtightComponent only activate on MapInit
This should stop it splitting atmospheres in mapping.
* Doc comments improvements to AtmosphereMap
Fix some malformed comments, inherit some useful docs, document some
more functions.
* Add zone logic for changing tiles to/from space
Zones are now correctly created when all the tiles in a room are built,
and destroyed when one of the tiles is destroyed.
* update engine
* right
* Cleanup code
* Port GasMixture, further cleanup
* Fix windows not being airtight, some other stuff
* Work on atmos
* Difference between ZoneBlocked and AirBlocked
* Big GridAtmosphereManager cleanup, zones are broken now oops
* Remove zones, add excited group implementation
* Further cleanup
* Further work on atmos
* Work on gas overlay.
* PumpGasTo and ReleaseGasTo methods for GasMixture.
* Adds Tile Overlay System.
* More work on atmos
* Gasses spread, equalize and all that
* Fix a few crashes
* Gas can actually spread from room to room after opening airlocks
* Add explosive depressurization, tile prying on depressurization, gas spreading on wall break. Etc.
* More work
* Remove atmoschem, add "performant" gas overlays
* what the fuck git
* More work I guess?
* Fix stuff, create a few (empty) components for future work
* Fix temperature
* Fix tile air sharing
* Atmos optimizations
* Further atmos optimizations
* Even more optimizations!
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Address a few reviews
* Oops, forgot to remove this
* Update Content.Server/Atmos/AtmosphereMap.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Fix compile
* Improved client gas tile overlays
* Less allocations
* Even less allocations!
* some stuff dunno
* Big refactor time, oh yeah
* it truly is 1 AM
* bruh
* No idea why now it doesn't work.
Oh well! I'll fix this on thursday :relieved:
* Basic atmos serialization
* Fix bugs, add VV attributes
* Start adding stuff for gas reactions
* Add a few atmos commands
* Fill gas command
* Changes to gas opacity
* Fixes I guess
* Fixes, add space wind sound
* High pressure movement!
* Better high pressure movements.
* Fix direction, maybe?
* And now it works great
* Science!
* and this is why you don't trust people
* remove logging
* Turns out I'm fucking dumb
* Work on hotspots and reactions, add tritium gas
* IGridAtmosphereComponent interface! For future unsimulated grids.
* Makes atmos updates NoGC.
* C E A S E
* Add settemp atmos command
* Important reminder.
* Remove useless AtmosCooldown.
* More work on hotspots
* Overlays for hotspots. Fire works!
* Turns out I suck at coding
* Fire texture change
* Yeah let's make that an absolute value, hmm?
* Support for atmos after teleporting grid (more or less)
* fix attempt (doesn't actually fix it)
* Make static variable not static
* Remove magic numbers
* Stopwatch moment
* Slight cleanup.
* More cleanup.
* Atmos optimizations
* Fix build
* Remove useless ghost atmos shit
* Adds CanSeeGases component for gas overlay stuff
* Component and prototype ignores
* ExcitedGroups now dispose on being merged with others
* Some tweaking.
* Atmos now uses frame time for updates.
* Nullable boogaloo
* IExamine fix
* Fix build
* Fix restartround
* Atmos tweaking, use invalid direction
* Increase high pressure movement force
* Better sort
* Update submodule.
* NULLABILITY AAAAH
Special thanks to monster860 and all monstermos contributors!
Co-authored-by: Campbell Suter <znix@znix.xyz>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
Co-authored-by: ComicIronic <comicironic@gmail.com>
Co-authored-by: silicons <2003111+silicons@users.noreply.github.com>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
2020-08-02 20:08:20 +02:00
|
|
|
|
|
2021-03-05 01:08:38 +01:00
|
|
|
|
[DataField("temperature")] [ViewVariables]
|
Adds atmos (#1389)
* Add initial atmospherics framework
* Make walls and airlocks airtight
* Add the basic atmosphere gas system
* Atmos: move CardinalToIntVec and Offset into extention methods in EntityNetworkUtils
* Optimize vending machine code a bit.
* Address feedback from Atmos PR, make code compile
Fix use of OnMove -> SnapGridComponent.OnPositionChanged.
Added pause checking to atmos simulations.
* Improvements to the existing ZAS prototype (#996)
* Rename Volume -> Quantity in GasProperty
This makes the name consistent with the rest of the code, given that
it's meant to be a mol value.
* Replace Gas enum with GasPrototype
Unused as of yet, but laying the groundwork for future changes.
* Update AtmosphereMap, improving maths
Adds a temporary default atmosphere, hardcoded in for testing. It will
be replaced eventually.
Fixed a maths mistake in the original code involving unit conversions.
Added the Take() method to IAtmosphere, for taking some volume of
mixture out of a gas mix. This will be pretty handy in the future, but
for now it's used by walls to delete air where they are built.
* Fix merging, splitting logic for zones
Removing a cell from a zone now correctly reduces its volume.
Adding a cell to a zone now correctly increases its volume.
* Improvements to atmos code, reorganising of types
Moved GasPrototype to shared, because it's going to be used by the
client later.
Split up the atmosphere code. Now zones are explicitly their own kind of
atmosphere, which should speed up some loops and also solve
inconsistencies in the volume calculation.
GasMixtures are another type of atmosphere, for more general use.
Try to fix the splitting/merging code, which was quite cryptic and not
clear at all. It *should* work now.
* Switch zones back to MapIndices
Turns out I'm an idiot who misunderstood the code. MapIndices can be
used as one-per-tile, which is what is needed for atmos. GridCoordinates
are many-per-tile, and were causing lots of problems.
* Add zone debugging overlay
This is the first example of zone information being sent to a client.
It adds the `togglezoneinfo` command, which overlays the tiles and gas
information for the zone currently occupied by the user on the screen.
This was helpful for debugging the GridCoordinates problem.
* Fix position of atmos zone debug text
* Make AirtightComponent only activate on MapInit
This should stop it splitting atmospheres in mapping.
* Doc comments improvements to AtmosphereMap
Fix some malformed comments, inherit some useful docs, document some
more functions.
* Add zone logic for changing tiles to/from space
Zones are now correctly created when all the tiles in a room are built,
and destroyed when one of the tiles is destroyed.
* update engine
* right
* Cleanup code
* Port GasMixture, further cleanup
* Fix windows not being airtight, some other stuff
* Work on atmos
* Difference between ZoneBlocked and AirBlocked
* Big GridAtmosphereManager cleanup, zones are broken now oops
* Remove zones, add excited group implementation
* Further cleanup
* Further work on atmos
* Work on gas overlay.
* PumpGasTo and ReleaseGasTo methods for GasMixture.
* Adds Tile Overlay System.
* More work on atmos
* Gasses spread, equalize and all that
* Fix a few crashes
* Gas can actually spread from room to room after opening airlocks
* Add explosive depressurization, tile prying on depressurization, gas spreading on wall break. Etc.
* More work
* Remove atmoschem, add "performant" gas overlays
* what the fuck git
* More work I guess?
* Fix stuff, create a few (empty) components for future work
* Fix temperature
* Fix tile air sharing
* Atmos optimizations
* Further atmos optimizations
* Even more optimizations!
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Address a few reviews
* Oops, forgot to remove this
* Update Content.Server/Atmos/AtmosphereMap.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Fix compile
* Improved client gas tile overlays
* Less allocations
* Even less allocations!
* some stuff dunno
* Big refactor time, oh yeah
* it truly is 1 AM
* bruh
* No idea why now it doesn't work.
Oh well! I'll fix this on thursday :relieved:
* Basic atmos serialization
* Fix bugs, add VV attributes
* Start adding stuff for gas reactions
* Add a few atmos commands
* Fill gas command
* Changes to gas opacity
* Fixes I guess
* Fixes, add space wind sound
* High pressure movement!
* Better high pressure movements.
* Fix direction, maybe?
* And now it works great
* Science!
* and this is why you don't trust people
* remove logging
* Turns out I'm fucking dumb
* Work on hotspots and reactions, add tritium gas
* IGridAtmosphereComponent interface! For future unsimulated grids.
* Makes atmos updates NoGC.
* C E A S E
* Add settemp atmos command
* Important reminder.
* Remove useless AtmosCooldown.
* More work on hotspots
* Overlays for hotspots. Fire works!
* Turns out I suck at coding
* Fire texture change
* Yeah let's make that an absolute value, hmm?
* Support for atmos after teleporting grid (more or less)
* fix attempt (doesn't actually fix it)
* Make static variable not static
* Remove magic numbers
* Stopwatch moment
* Slight cleanup.
* More cleanup.
* Atmos optimizations
* Fix build
* Remove useless ghost atmos shit
* Adds CanSeeGases component for gas overlay stuff
* Component and prototype ignores
* ExcitedGroups now dispose on being merged with others
* Some tweaking.
* Atmos now uses frame time for updates.
* Nullable boogaloo
* IExamine fix
* Fix build
* Fix restartround
* Atmos tweaking, use invalid direction
* Increase high pressure movement force
* Better sort
* Update submodule.
* NULLABILITY AAAAH
Special thanks to monster860 and all monstermos contributors!
Co-authored-by: Campbell Suter <znix@znix.xyz>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
Co-authored-by: ComicIronic <comicironic@gmail.com>
Co-authored-by: silicons <2003111+silicons@users.noreply.github.com>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
2020-08-02 20:08:20 +02:00
|
|
|
|
private float _temperature = Atmospherics.TCMB;
|
2020-08-25 16:14:26 +02:00
|
|
|
|
|
2021-03-05 01:08:38 +01:00
|
|
|
|
[DataField("immutable")] [ViewVariables]
|
Adds atmos (#1389)
* Add initial atmospherics framework
* Make walls and airlocks airtight
* Add the basic atmosphere gas system
* Atmos: move CardinalToIntVec and Offset into extention methods in EntityNetworkUtils
* Optimize vending machine code a bit.
* Address feedback from Atmos PR, make code compile
Fix use of OnMove -> SnapGridComponent.OnPositionChanged.
Added pause checking to atmos simulations.
* Improvements to the existing ZAS prototype (#996)
* Rename Volume -> Quantity in GasProperty
This makes the name consistent with the rest of the code, given that
it's meant to be a mol value.
* Replace Gas enum with GasPrototype
Unused as of yet, but laying the groundwork for future changes.
* Update AtmosphereMap, improving maths
Adds a temporary default atmosphere, hardcoded in for testing. It will
be replaced eventually.
Fixed a maths mistake in the original code involving unit conversions.
Added the Take() method to IAtmosphere, for taking some volume of
mixture out of a gas mix. This will be pretty handy in the future, but
for now it's used by walls to delete air where they are built.
* Fix merging, splitting logic for zones
Removing a cell from a zone now correctly reduces its volume.
Adding a cell to a zone now correctly increases its volume.
* Improvements to atmos code, reorganising of types
Moved GasPrototype to shared, because it's going to be used by the
client later.
Split up the atmosphere code. Now zones are explicitly their own kind of
atmosphere, which should speed up some loops and also solve
inconsistencies in the volume calculation.
GasMixtures are another type of atmosphere, for more general use.
Try to fix the splitting/merging code, which was quite cryptic and not
clear at all. It *should* work now.
* Switch zones back to MapIndices
Turns out I'm an idiot who misunderstood the code. MapIndices can be
used as one-per-tile, which is what is needed for atmos. GridCoordinates
are many-per-tile, and were causing lots of problems.
* Add zone debugging overlay
This is the first example of zone information being sent to a client.
It adds the `togglezoneinfo` command, which overlays the tiles and gas
information for the zone currently occupied by the user on the screen.
This was helpful for debugging the GridCoordinates problem.
* Fix position of atmos zone debug text
* Make AirtightComponent only activate on MapInit
This should stop it splitting atmospheres in mapping.
* Doc comments improvements to AtmosphereMap
Fix some malformed comments, inherit some useful docs, document some
more functions.
* Add zone logic for changing tiles to/from space
Zones are now correctly created when all the tiles in a room are built,
and destroyed when one of the tiles is destroyed.
* update engine
* right
* Cleanup code
* Port GasMixture, further cleanup
* Fix windows not being airtight, some other stuff
* Work on atmos
* Difference between ZoneBlocked and AirBlocked
* Big GridAtmosphereManager cleanup, zones are broken now oops
* Remove zones, add excited group implementation
* Further cleanup
* Further work on atmos
* Work on gas overlay.
* PumpGasTo and ReleaseGasTo methods for GasMixture.
* Adds Tile Overlay System.
* More work on atmos
* Gasses spread, equalize and all that
* Fix a few crashes
* Gas can actually spread from room to room after opening airlocks
* Add explosive depressurization, tile prying on depressurization, gas spreading on wall break. Etc.
* More work
* Remove atmoschem, add "performant" gas overlays
* what the fuck git
* More work I guess?
* Fix stuff, create a few (empty) components for future work
* Fix temperature
* Fix tile air sharing
* Atmos optimizations
* Further atmos optimizations
* Even more optimizations!
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Address a few reviews
* Oops, forgot to remove this
* Update Content.Server/Atmos/AtmosphereMap.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Fix compile
* Improved client gas tile overlays
* Less allocations
* Even less allocations!
* some stuff dunno
* Big refactor time, oh yeah
* it truly is 1 AM
* bruh
* No idea why now it doesn't work.
Oh well! I'll fix this on thursday :relieved:
* Basic atmos serialization
* Fix bugs, add VV attributes
* Start adding stuff for gas reactions
* Add a few atmos commands
* Fill gas command
* Changes to gas opacity
* Fixes I guess
* Fixes, add space wind sound
* High pressure movement!
* Better high pressure movements.
* Fix direction, maybe?
* And now it works great
* Science!
* and this is why you don't trust people
* remove logging
* Turns out I'm fucking dumb
* Work on hotspots and reactions, add tritium gas
* IGridAtmosphereComponent interface! For future unsimulated grids.
* Makes atmos updates NoGC.
* C E A S E
* Add settemp atmos command
* Important reminder.
* Remove useless AtmosCooldown.
* More work on hotspots
* Overlays for hotspots. Fire works!
* Turns out I suck at coding
* Fire texture change
* Yeah let's make that an absolute value, hmm?
* Support for atmos after teleporting grid (more or less)
* fix attempt (doesn't actually fix it)
* Make static variable not static
* Remove magic numbers
* Stopwatch moment
* Slight cleanup.
* More cleanup.
* Atmos optimizations
* Fix build
* Remove useless ghost atmos shit
* Adds CanSeeGases component for gas overlay stuff
* Component and prototype ignores
* ExcitedGroups now dispose on being merged with others
* Some tweaking.
* Atmos now uses frame time for updates.
* Nullable boogaloo
* IExamine fix
* Fix build
* Fix restartround
* Atmos tweaking, use invalid direction
* Increase high pressure movement force
* Better sort
* Update submodule.
* NULLABILITY AAAAH
Special thanks to monster860 and all monstermos contributors!
Co-authored-by: Campbell Suter <znix@znix.xyz>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
Co-authored-by: ComicIronic <comicironic@gmail.com>
Co-authored-by: silicons <2003111+silicons@users.noreply.github.com>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
2020-08-02 20:08:20 +02:00
|
|
|
|
public bool Immutable { get; private set; }
|
|
|
|
|
|
|
2020-08-08 19:16:24 +02:00
|
|
|
|
[ViewVariables]
|
2020-11-27 11:00:49 +01:00
|
|
|
|
public readonly Dictionary<GasReaction, float> ReactionResults = new()
|
2020-08-08 19:16:24 +02:00
|
|
|
|
{
|
|
|
|
|
|
// We initialize the dictionary here.
|
|
|
|
|
|
{ GasReaction.Fire, 0f }
|
|
|
|
|
|
};
|
|
|
|
|
|
|
Adds atmos (#1389)
* Add initial atmospherics framework
* Make walls and airlocks airtight
* Add the basic atmosphere gas system
* Atmos: move CardinalToIntVec and Offset into extention methods in EntityNetworkUtils
* Optimize vending machine code a bit.
* Address feedback from Atmos PR, make code compile
Fix use of OnMove -> SnapGridComponent.OnPositionChanged.
Added pause checking to atmos simulations.
* Improvements to the existing ZAS prototype (#996)
* Rename Volume -> Quantity in GasProperty
This makes the name consistent with the rest of the code, given that
it's meant to be a mol value.
* Replace Gas enum with GasPrototype
Unused as of yet, but laying the groundwork for future changes.
* Update AtmosphereMap, improving maths
Adds a temporary default atmosphere, hardcoded in for testing. It will
be replaced eventually.
Fixed a maths mistake in the original code involving unit conversions.
Added the Take() method to IAtmosphere, for taking some volume of
mixture out of a gas mix. This will be pretty handy in the future, but
for now it's used by walls to delete air where they are built.
* Fix merging, splitting logic for zones
Removing a cell from a zone now correctly reduces its volume.
Adding a cell to a zone now correctly increases its volume.
* Improvements to atmos code, reorganising of types
Moved GasPrototype to shared, because it's going to be used by the
client later.
Split up the atmosphere code. Now zones are explicitly their own kind of
atmosphere, which should speed up some loops and also solve
inconsistencies in the volume calculation.
GasMixtures are another type of atmosphere, for more general use.
Try to fix the splitting/merging code, which was quite cryptic and not
clear at all. It *should* work now.
* Switch zones back to MapIndices
Turns out I'm an idiot who misunderstood the code. MapIndices can be
used as one-per-tile, which is what is needed for atmos. GridCoordinates
are many-per-tile, and were causing lots of problems.
* Add zone debugging overlay
This is the first example of zone information being sent to a client.
It adds the `togglezoneinfo` command, which overlays the tiles and gas
information for the zone currently occupied by the user on the screen.
This was helpful for debugging the GridCoordinates problem.
* Fix position of atmos zone debug text
* Make AirtightComponent only activate on MapInit
This should stop it splitting atmospheres in mapping.
* Doc comments improvements to AtmosphereMap
Fix some malformed comments, inherit some useful docs, document some
more functions.
* Add zone logic for changing tiles to/from space
Zones are now correctly created when all the tiles in a room are built,
and destroyed when one of the tiles is destroyed.
* update engine
* right
* Cleanup code
* Port GasMixture, further cleanup
* Fix windows not being airtight, some other stuff
* Work on atmos
* Difference between ZoneBlocked and AirBlocked
* Big GridAtmosphereManager cleanup, zones are broken now oops
* Remove zones, add excited group implementation
* Further cleanup
* Further work on atmos
* Work on gas overlay.
* PumpGasTo and ReleaseGasTo methods for GasMixture.
* Adds Tile Overlay System.
* More work on atmos
* Gasses spread, equalize and all that
* Fix a few crashes
* Gas can actually spread from room to room after opening airlocks
* Add explosive depressurization, tile prying on depressurization, gas spreading on wall break. Etc.
* More work
* Remove atmoschem, add "performant" gas overlays
* what the fuck git
* More work I guess?
* Fix stuff, create a few (empty) components for future work
* Fix temperature
* Fix tile air sharing
* Atmos optimizations
* Further atmos optimizations
* Even more optimizations!
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Address a few reviews
* Oops, forgot to remove this
* Update Content.Server/Atmos/AtmosphereMap.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Fix compile
* Improved client gas tile overlays
* Less allocations
* Even less allocations!
* some stuff dunno
* Big refactor time, oh yeah
* it truly is 1 AM
* bruh
* No idea why now it doesn't work.
Oh well! I'll fix this on thursday :relieved:
* Basic atmos serialization
* Fix bugs, add VV attributes
* Start adding stuff for gas reactions
* Add a few atmos commands
* Fill gas command
* Changes to gas opacity
* Fixes I guess
* Fixes, add space wind sound
* High pressure movement!
* Better high pressure movements.
* Fix direction, maybe?
* And now it works great
* Science!
* and this is why you don't trust people
* remove logging
* Turns out I'm fucking dumb
* Work on hotspots and reactions, add tritium gas
* IGridAtmosphereComponent interface! For future unsimulated grids.
* Makes atmos updates NoGC.
* C E A S E
* Add settemp atmos command
* Important reminder.
* Remove useless AtmosCooldown.
* More work on hotspots
* Overlays for hotspots. Fire works!
* Turns out I suck at coding
* Fire texture change
* Yeah let's make that an absolute value, hmm?
* Support for atmos after teleporting grid (more or less)
* fix attempt (doesn't actually fix it)
* Make static variable not static
* Remove magic numbers
* Stopwatch moment
* Slight cleanup.
* More cleanup.
* Atmos optimizations
* Fix build
* Remove useless ghost atmos shit
* Adds CanSeeGases component for gas overlay stuff
* Component and prototype ignores
* ExcitedGroups now dispose on being merged with others
* Some tweaking.
* Atmos now uses frame time for updates.
* Nullable boogaloo
* IExamine fix
* Fix build
* Fix restartround
* Atmos tweaking, use invalid direction
* Increase high pressure movement force
* Better sort
* Update submodule.
* NULLABILITY AAAAH
Special thanks to monster860 and all monstermos contributors!
Co-authored-by: Campbell Suter <znix@znix.xyz>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
Co-authored-by: ComicIronic <comicironic@gmail.com>
Co-authored-by: silicons <2003111+silicons@users.noreply.github.com>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
2020-08-02 20:08:20 +02:00
|
|
|
|
[ViewVariables]
|
|
|
|
|
|
public float TotalMoles
|
|
|
|
|
|
{
|
|
|
|
|
|
[MethodImpl(MethodImplOptions.AggressiveInlining)]
|
2021-06-23 11:35:30 +02:00
|
|
|
|
get => NumericsHelpers.HorizontalAdd(Moles);
|
Adds atmos (#1389)
* Add initial atmospherics framework
* Make walls and airlocks airtight
* Add the basic atmosphere gas system
* Atmos: move CardinalToIntVec and Offset into extention methods in EntityNetworkUtils
* Optimize vending machine code a bit.
* Address feedback from Atmos PR, make code compile
Fix use of OnMove -> SnapGridComponent.OnPositionChanged.
Added pause checking to atmos simulations.
* Improvements to the existing ZAS prototype (#996)
* Rename Volume -> Quantity in GasProperty
This makes the name consistent with the rest of the code, given that
it's meant to be a mol value.
* Replace Gas enum with GasPrototype
Unused as of yet, but laying the groundwork for future changes.
* Update AtmosphereMap, improving maths
Adds a temporary default atmosphere, hardcoded in for testing. It will
be replaced eventually.
Fixed a maths mistake in the original code involving unit conversions.
Added the Take() method to IAtmosphere, for taking some volume of
mixture out of a gas mix. This will be pretty handy in the future, but
for now it's used by walls to delete air where they are built.
* Fix merging, splitting logic for zones
Removing a cell from a zone now correctly reduces its volume.
Adding a cell to a zone now correctly increases its volume.
* Improvements to atmos code, reorganising of types
Moved GasPrototype to shared, because it's going to be used by the
client later.
Split up the atmosphere code. Now zones are explicitly their own kind of
atmosphere, which should speed up some loops and also solve
inconsistencies in the volume calculation.
GasMixtures are another type of atmosphere, for more general use.
Try to fix the splitting/merging code, which was quite cryptic and not
clear at all. It *should* work now.
* Switch zones back to MapIndices
Turns out I'm an idiot who misunderstood the code. MapIndices can be
used as one-per-tile, which is what is needed for atmos. GridCoordinates
are many-per-tile, and were causing lots of problems.
* Add zone debugging overlay
This is the first example of zone information being sent to a client.
It adds the `togglezoneinfo` command, which overlays the tiles and gas
information for the zone currently occupied by the user on the screen.
This was helpful for debugging the GridCoordinates problem.
* Fix position of atmos zone debug text
* Make AirtightComponent only activate on MapInit
This should stop it splitting atmospheres in mapping.
* Doc comments improvements to AtmosphereMap
Fix some malformed comments, inherit some useful docs, document some
more functions.
* Add zone logic for changing tiles to/from space
Zones are now correctly created when all the tiles in a room are built,
and destroyed when one of the tiles is destroyed.
* update engine
* right
* Cleanup code
* Port GasMixture, further cleanup
* Fix windows not being airtight, some other stuff
* Work on atmos
* Difference between ZoneBlocked and AirBlocked
* Big GridAtmosphereManager cleanup, zones are broken now oops
* Remove zones, add excited group implementation
* Further cleanup
* Further work on atmos
* Work on gas overlay.
* PumpGasTo and ReleaseGasTo methods for GasMixture.
* Adds Tile Overlay System.
* More work on atmos
* Gasses spread, equalize and all that
* Fix a few crashes
* Gas can actually spread from room to room after opening airlocks
* Add explosive depressurization, tile prying on depressurization, gas spreading on wall break. Etc.
* More work
* Remove atmoschem, add "performant" gas overlays
* what the fuck git
* More work I guess?
* Fix stuff, create a few (empty) components for future work
* Fix temperature
* Fix tile air sharing
* Atmos optimizations
* Further atmos optimizations
* Even more optimizations!
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Address a few reviews
* Oops, forgot to remove this
* Update Content.Server/Atmos/AtmosphereMap.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Fix compile
* Improved client gas tile overlays
* Less allocations
* Even less allocations!
* some stuff dunno
* Big refactor time, oh yeah
* it truly is 1 AM
* bruh
* No idea why now it doesn't work.
Oh well! I'll fix this on thursday :relieved:
* Basic atmos serialization
* Fix bugs, add VV attributes
* Start adding stuff for gas reactions
* Add a few atmos commands
* Fill gas command
* Changes to gas opacity
* Fixes I guess
* Fixes, add space wind sound
* High pressure movement!
* Better high pressure movements.
* Fix direction, maybe?
* And now it works great
* Science!
* and this is why you don't trust people
* remove logging
* Turns out I'm fucking dumb
* Work on hotspots and reactions, add tritium gas
* IGridAtmosphereComponent interface! For future unsimulated grids.
* Makes atmos updates NoGC.
* C E A S E
* Add settemp atmos command
* Important reminder.
* Remove useless AtmosCooldown.
* More work on hotspots
* Overlays for hotspots. Fire works!
* Turns out I suck at coding
* Fire texture change
* Yeah let's make that an absolute value, hmm?
* Support for atmos after teleporting grid (more or less)
* fix attempt (doesn't actually fix it)
* Make static variable not static
* Remove magic numbers
* Stopwatch moment
* Slight cleanup.
* More cleanup.
* Atmos optimizations
* Fix build
* Remove useless ghost atmos shit
* Adds CanSeeGases component for gas overlay stuff
* Component and prototype ignores
* ExcitedGroups now dispose on being merged with others
* Some tweaking.
* Atmos now uses frame time for updates.
* Nullable boogaloo
* IExamine fix
* Fix build
* Fix restartround
* Atmos tweaking, use invalid direction
* Increase high pressure movement force
* Better sort
* Update submodule.
* NULLABILITY AAAAH
Special thanks to monster860 and all monstermos contributors!
Co-authored-by: Campbell Suter <znix@znix.xyz>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
Co-authored-by: ComicIronic <comicironic@gmail.com>
Co-authored-by: silicons <2003111+silicons@users.noreply.github.com>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
2020-08-02 20:08:20 +02:00
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
[ViewVariables]
|
|
|
|
|
|
public float Pressure
|
|
|
|
|
|
{
|
|
|
|
|
|
get
|
|
|
|
|
|
{
|
|
|
|
|
|
if (Volume <= 0) return 0f;
|
|
|
|
|
|
return TotalMoles * Atmospherics.R * Temperature / Volume;
|
|
|
|
|
|
}
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
[ViewVariables]
|
|
|
|
|
|
public float Temperature
|
|
|
|
|
|
{
|
|
|
|
|
|
get => _temperature;
|
|
|
|
|
|
set
|
|
|
|
|
|
{
|
|
|
|
|
|
if (Immutable) return;
|
2020-08-02 20:38:10 +02:00
|
|
|
|
_temperature = MathF.Max(value, Atmospherics.TCMB);
|
Adds atmos (#1389)
* Add initial atmospherics framework
* Make walls and airlocks airtight
* Add the basic atmosphere gas system
* Atmos: move CardinalToIntVec and Offset into extention methods in EntityNetworkUtils
* Optimize vending machine code a bit.
* Address feedback from Atmos PR, make code compile
Fix use of OnMove -> SnapGridComponent.OnPositionChanged.
Added pause checking to atmos simulations.
* Improvements to the existing ZAS prototype (#996)
* Rename Volume -> Quantity in GasProperty
This makes the name consistent with the rest of the code, given that
it's meant to be a mol value.
* Replace Gas enum with GasPrototype
Unused as of yet, but laying the groundwork for future changes.
* Update AtmosphereMap, improving maths
Adds a temporary default atmosphere, hardcoded in for testing. It will
be replaced eventually.
Fixed a maths mistake in the original code involving unit conversions.
Added the Take() method to IAtmosphere, for taking some volume of
mixture out of a gas mix. This will be pretty handy in the future, but
for now it's used by walls to delete air where they are built.
* Fix merging, splitting logic for zones
Removing a cell from a zone now correctly reduces its volume.
Adding a cell to a zone now correctly increases its volume.
* Improvements to atmos code, reorganising of types
Moved GasPrototype to shared, because it's going to be used by the
client later.
Split up the atmosphere code. Now zones are explicitly their own kind of
atmosphere, which should speed up some loops and also solve
inconsistencies in the volume calculation.
GasMixtures are another type of atmosphere, for more general use.
Try to fix the splitting/merging code, which was quite cryptic and not
clear at all. It *should* work now.
* Switch zones back to MapIndices
Turns out I'm an idiot who misunderstood the code. MapIndices can be
used as one-per-tile, which is what is needed for atmos. GridCoordinates
are many-per-tile, and were causing lots of problems.
* Add zone debugging overlay
This is the first example of zone information being sent to a client.
It adds the `togglezoneinfo` command, which overlays the tiles and gas
information for the zone currently occupied by the user on the screen.
This was helpful for debugging the GridCoordinates problem.
* Fix position of atmos zone debug text
* Make AirtightComponent only activate on MapInit
This should stop it splitting atmospheres in mapping.
* Doc comments improvements to AtmosphereMap
Fix some malformed comments, inherit some useful docs, document some
more functions.
* Add zone logic for changing tiles to/from space
Zones are now correctly created when all the tiles in a room are built,
and destroyed when one of the tiles is destroyed.
* update engine
* right
* Cleanup code
* Port GasMixture, further cleanup
* Fix windows not being airtight, some other stuff
* Work on atmos
* Difference between ZoneBlocked and AirBlocked
* Big GridAtmosphereManager cleanup, zones are broken now oops
* Remove zones, add excited group implementation
* Further cleanup
* Further work on atmos
* Work on gas overlay.
* PumpGasTo and ReleaseGasTo methods for GasMixture.
* Adds Tile Overlay System.
* More work on atmos
* Gasses spread, equalize and all that
* Fix a few crashes
* Gas can actually spread from room to room after opening airlocks
* Add explosive depressurization, tile prying on depressurization, gas spreading on wall break. Etc.
* More work
* Remove atmoschem, add "performant" gas overlays
* what the fuck git
* More work I guess?
* Fix stuff, create a few (empty) components for future work
* Fix temperature
* Fix tile air sharing
* Atmos optimizations
* Further atmos optimizations
* Even more optimizations!
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Address a few reviews
* Oops, forgot to remove this
* Update Content.Server/Atmos/AtmosphereMap.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Fix compile
* Improved client gas tile overlays
* Less allocations
* Even less allocations!
* some stuff dunno
* Big refactor time, oh yeah
* it truly is 1 AM
* bruh
* No idea why now it doesn't work.
Oh well! I'll fix this on thursday :relieved:
* Basic atmos serialization
* Fix bugs, add VV attributes
* Start adding stuff for gas reactions
* Add a few atmos commands
* Fill gas command
* Changes to gas opacity
* Fixes I guess
* Fixes, add space wind sound
* High pressure movement!
* Better high pressure movements.
* Fix direction, maybe?
* And now it works great
* Science!
* and this is why you don't trust people
* remove logging
* Turns out I'm fucking dumb
* Work on hotspots and reactions, add tritium gas
* IGridAtmosphereComponent interface! For future unsimulated grids.
* Makes atmos updates NoGC.
* C E A S E
* Add settemp atmos command
* Important reminder.
* Remove useless AtmosCooldown.
* More work on hotspots
* Overlays for hotspots. Fire works!
* Turns out I suck at coding
* Fire texture change
* Yeah let's make that an absolute value, hmm?
* Support for atmos after teleporting grid (more or less)
* fix attempt (doesn't actually fix it)
* Make static variable not static
* Remove magic numbers
* Stopwatch moment
* Slight cleanup.
* More cleanup.
* Atmos optimizations
* Fix build
* Remove useless ghost atmos shit
* Adds CanSeeGases component for gas overlay stuff
* Component and prototype ignores
* ExcitedGroups now dispose on being merged with others
* Some tweaking.
* Atmos now uses frame time for updates.
* Nullable boogaloo
* IExamine fix
* Fix build
* Fix restartround
* Atmos tweaking, use invalid direction
* Increase high pressure movement force
* Better sort
* Update submodule.
* NULLABILITY AAAAH
Special thanks to monster860 and all monstermos contributors!
Co-authored-by: Campbell Suter <znix@znix.xyz>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
Co-authored-by: ComicIronic <comicironic@gmail.com>
Co-authored-by: silicons <2003111+silicons@users.noreply.github.com>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
2020-08-02 20:08:20 +02:00
|
|
|
|
}
|
|
|
|
|
|
}
|
|
|
|
|
|
|
2021-03-05 01:08:38 +01:00
|
|
|
|
[DataField("volume")] [ViewVariables]
|
Adds atmos (#1389)
* Add initial atmospherics framework
* Make walls and airlocks airtight
* Add the basic atmosphere gas system
* Atmos: move CardinalToIntVec and Offset into extention methods in EntityNetworkUtils
* Optimize vending machine code a bit.
* Address feedback from Atmos PR, make code compile
Fix use of OnMove -> SnapGridComponent.OnPositionChanged.
Added pause checking to atmos simulations.
* Improvements to the existing ZAS prototype (#996)
* Rename Volume -> Quantity in GasProperty
This makes the name consistent with the rest of the code, given that
it's meant to be a mol value.
* Replace Gas enum with GasPrototype
Unused as of yet, but laying the groundwork for future changes.
* Update AtmosphereMap, improving maths
Adds a temporary default atmosphere, hardcoded in for testing. It will
be replaced eventually.
Fixed a maths mistake in the original code involving unit conversions.
Added the Take() method to IAtmosphere, for taking some volume of
mixture out of a gas mix. This will be pretty handy in the future, but
for now it's used by walls to delete air where they are built.
* Fix merging, splitting logic for zones
Removing a cell from a zone now correctly reduces its volume.
Adding a cell to a zone now correctly increases its volume.
* Improvements to atmos code, reorganising of types
Moved GasPrototype to shared, because it's going to be used by the
client later.
Split up the atmosphere code. Now zones are explicitly their own kind of
atmosphere, which should speed up some loops and also solve
inconsistencies in the volume calculation.
GasMixtures are another type of atmosphere, for more general use.
Try to fix the splitting/merging code, which was quite cryptic and not
clear at all. It *should* work now.
* Switch zones back to MapIndices
Turns out I'm an idiot who misunderstood the code. MapIndices can be
used as one-per-tile, which is what is needed for atmos. GridCoordinates
are many-per-tile, and were causing lots of problems.
* Add zone debugging overlay
This is the first example of zone information being sent to a client.
It adds the `togglezoneinfo` command, which overlays the tiles and gas
information for the zone currently occupied by the user on the screen.
This was helpful for debugging the GridCoordinates problem.
* Fix position of atmos zone debug text
* Make AirtightComponent only activate on MapInit
This should stop it splitting atmospheres in mapping.
* Doc comments improvements to AtmosphereMap
Fix some malformed comments, inherit some useful docs, document some
more functions.
* Add zone logic for changing tiles to/from space
Zones are now correctly created when all the tiles in a room are built,
and destroyed when one of the tiles is destroyed.
* update engine
* right
* Cleanup code
* Port GasMixture, further cleanup
* Fix windows not being airtight, some other stuff
* Work on atmos
* Difference between ZoneBlocked and AirBlocked
* Big GridAtmosphereManager cleanup, zones are broken now oops
* Remove zones, add excited group implementation
* Further cleanup
* Further work on atmos
* Work on gas overlay.
* PumpGasTo and ReleaseGasTo methods for GasMixture.
* Adds Tile Overlay System.
* More work on atmos
* Gasses spread, equalize and all that
* Fix a few crashes
* Gas can actually spread from room to room after opening airlocks
* Add explosive depressurization, tile prying on depressurization, gas spreading on wall break. Etc.
* More work
* Remove atmoschem, add "performant" gas overlays
* what the fuck git
* More work I guess?
* Fix stuff, create a few (empty) components for future work
* Fix temperature
* Fix tile air sharing
* Atmos optimizations
* Further atmos optimizations
* Even more optimizations!
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Address a few reviews
* Oops, forgot to remove this
* Update Content.Server/Atmos/AtmosphereMap.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Fix compile
* Improved client gas tile overlays
* Less allocations
* Even less allocations!
* some stuff dunno
* Big refactor time, oh yeah
* it truly is 1 AM
* bruh
* No idea why now it doesn't work.
Oh well! I'll fix this on thursday :relieved:
* Basic atmos serialization
* Fix bugs, add VV attributes
* Start adding stuff for gas reactions
* Add a few atmos commands
* Fill gas command
* Changes to gas opacity
* Fixes I guess
* Fixes, add space wind sound
* High pressure movement!
* Better high pressure movements.
* Fix direction, maybe?
* And now it works great
* Science!
* and this is why you don't trust people
* remove logging
* Turns out I'm fucking dumb
* Work on hotspots and reactions, add tritium gas
* IGridAtmosphereComponent interface! For future unsimulated grids.
* Makes atmos updates NoGC.
* C E A S E
* Add settemp atmos command
* Important reminder.
* Remove useless AtmosCooldown.
* More work on hotspots
* Overlays for hotspots. Fire works!
* Turns out I suck at coding
* Fire texture change
* Yeah let's make that an absolute value, hmm?
* Support for atmos after teleporting grid (more or less)
* fix attempt (doesn't actually fix it)
* Make static variable not static
* Remove magic numbers
* Stopwatch moment
* Slight cleanup.
* More cleanup.
* Atmos optimizations
* Fix build
* Remove useless ghost atmos shit
* Adds CanSeeGases component for gas overlay stuff
* Component and prototype ignores
* ExcitedGroups now dispose on being merged with others
* Some tweaking.
* Atmos now uses frame time for updates.
* Nullable boogaloo
* IExamine fix
* Fix build
* Fix restartround
* Atmos tweaking, use invalid direction
* Increase high pressure movement force
* Better sort
* Update submodule.
* NULLABILITY AAAAH
Special thanks to monster860 and all monstermos contributors!
Co-authored-by: Campbell Suter <znix@znix.xyz>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
Co-authored-by: ComicIronic <comicironic@gmail.com>
Co-authored-by: silicons <2003111+silicons@users.noreply.github.com>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
2020-08-02 20:08:20 +02:00
|
|
|
|
public float Volume { get; set; }
|
|
|
|
|
|
|
2021-06-23 11:35:30 +02:00
|
|
|
|
public GasMixture()
|
Adds atmos (#1389)
* Add initial atmospherics framework
* Make walls and airlocks airtight
* Add the basic atmosphere gas system
* Atmos: move CardinalToIntVec and Offset into extention methods in EntityNetworkUtils
* Optimize vending machine code a bit.
* Address feedback from Atmos PR, make code compile
Fix use of OnMove -> SnapGridComponent.OnPositionChanged.
Added pause checking to atmos simulations.
* Improvements to the existing ZAS prototype (#996)
* Rename Volume -> Quantity in GasProperty
This makes the name consistent with the rest of the code, given that
it's meant to be a mol value.
* Replace Gas enum with GasPrototype
Unused as of yet, but laying the groundwork for future changes.
* Update AtmosphereMap, improving maths
Adds a temporary default atmosphere, hardcoded in for testing. It will
be replaced eventually.
Fixed a maths mistake in the original code involving unit conversions.
Added the Take() method to IAtmosphere, for taking some volume of
mixture out of a gas mix. This will be pretty handy in the future, but
for now it's used by walls to delete air where they are built.
* Fix merging, splitting logic for zones
Removing a cell from a zone now correctly reduces its volume.
Adding a cell to a zone now correctly increases its volume.
* Improvements to atmos code, reorganising of types
Moved GasPrototype to shared, because it's going to be used by the
client later.
Split up the atmosphere code. Now zones are explicitly their own kind of
atmosphere, which should speed up some loops and also solve
inconsistencies in the volume calculation.
GasMixtures are another type of atmosphere, for more general use.
Try to fix the splitting/merging code, which was quite cryptic and not
clear at all. It *should* work now.
* Switch zones back to MapIndices
Turns out I'm an idiot who misunderstood the code. MapIndices can be
used as one-per-tile, which is what is needed for atmos. GridCoordinates
are many-per-tile, and were causing lots of problems.
* Add zone debugging overlay
This is the first example of zone information being sent to a client.
It adds the `togglezoneinfo` command, which overlays the tiles and gas
information for the zone currently occupied by the user on the screen.
This was helpful for debugging the GridCoordinates problem.
* Fix position of atmos zone debug text
* Make AirtightComponent only activate on MapInit
This should stop it splitting atmospheres in mapping.
* Doc comments improvements to AtmosphereMap
Fix some malformed comments, inherit some useful docs, document some
more functions.
* Add zone logic for changing tiles to/from space
Zones are now correctly created when all the tiles in a room are built,
and destroyed when one of the tiles is destroyed.
* update engine
* right
* Cleanup code
* Port GasMixture, further cleanup
* Fix windows not being airtight, some other stuff
* Work on atmos
* Difference between ZoneBlocked and AirBlocked
* Big GridAtmosphereManager cleanup, zones are broken now oops
* Remove zones, add excited group implementation
* Further cleanup
* Further work on atmos
* Work on gas overlay.
* PumpGasTo and ReleaseGasTo methods for GasMixture.
* Adds Tile Overlay System.
* More work on atmos
* Gasses spread, equalize and all that
* Fix a few crashes
* Gas can actually spread from room to room after opening airlocks
* Add explosive depressurization, tile prying on depressurization, gas spreading on wall break. Etc.
* More work
* Remove atmoschem, add "performant" gas overlays
* what the fuck git
* More work I guess?
* Fix stuff, create a few (empty) components for future work
* Fix temperature
* Fix tile air sharing
* Atmos optimizations
* Further atmos optimizations
* Even more optimizations!
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Address a few reviews
* Oops, forgot to remove this
* Update Content.Server/Atmos/AtmosphereMap.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Fix compile
* Improved client gas tile overlays
* Less allocations
* Even less allocations!
* some stuff dunno
* Big refactor time, oh yeah
* it truly is 1 AM
* bruh
* No idea why now it doesn't work.
Oh well! I'll fix this on thursday :relieved:
* Basic atmos serialization
* Fix bugs, add VV attributes
* Start adding stuff for gas reactions
* Add a few atmos commands
* Fill gas command
* Changes to gas opacity
* Fixes I guess
* Fixes, add space wind sound
* High pressure movement!
* Better high pressure movements.
* Fix direction, maybe?
* And now it works great
* Science!
* and this is why you don't trust people
* remove logging
* Turns out I'm fucking dumb
* Work on hotspots and reactions, add tritium gas
* IGridAtmosphereComponent interface! For future unsimulated grids.
* Makes atmos updates NoGC.
* C E A S E
* Add settemp atmos command
* Important reminder.
* Remove useless AtmosCooldown.
* More work on hotspots
* Overlays for hotspots. Fire works!
* Turns out I suck at coding
* Fire texture change
* Yeah let's make that an absolute value, hmm?
* Support for atmos after teleporting grid (more or less)
* fix attempt (doesn't actually fix it)
* Make static variable not static
* Remove magic numbers
* Stopwatch moment
* Slight cleanup.
* More cleanup.
* Atmos optimizations
* Fix build
* Remove useless ghost atmos shit
* Adds CanSeeGases component for gas overlay stuff
* Component and prototype ignores
* ExcitedGroups now dispose on being merged with others
* Some tweaking.
* Atmos now uses frame time for updates.
* Nullable boogaloo
* IExamine fix
* Fix build
* Fix restartround
* Atmos tweaking, use invalid direction
* Increase high pressure movement force
* Better sort
* Update submodule.
* NULLABILITY AAAAH
Special thanks to monster860 and all monstermos contributors!
Co-authored-by: Campbell Suter <znix@znix.xyz>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
Co-authored-by: ComicIronic <comicironic@gmail.com>
Co-authored-by: silicons <2003111+silicons@users.noreply.github.com>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
2020-08-02 20:08:20 +02:00
|
|
|
|
{
|
|
|
|
|
|
}
|
|
|
|
|
|
|
2021-06-23 11:35:30 +02:00
|
|
|
|
public GasMixture(float volume = 0f)
|
Adds atmos (#1389)
* Add initial atmospherics framework
* Make walls and airlocks airtight
* Add the basic atmosphere gas system
* Atmos: move CardinalToIntVec and Offset into extention methods in EntityNetworkUtils
* Optimize vending machine code a bit.
* Address feedback from Atmos PR, make code compile
Fix use of OnMove -> SnapGridComponent.OnPositionChanged.
Added pause checking to atmos simulations.
* Improvements to the existing ZAS prototype (#996)
* Rename Volume -> Quantity in GasProperty
This makes the name consistent with the rest of the code, given that
it's meant to be a mol value.
* Replace Gas enum with GasPrototype
Unused as of yet, but laying the groundwork for future changes.
* Update AtmosphereMap, improving maths
Adds a temporary default atmosphere, hardcoded in for testing. It will
be replaced eventually.
Fixed a maths mistake in the original code involving unit conversions.
Added the Take() method to IAtmosphere, for taking some volume of
mixture out of a gas mix. This will be pretty handy in the future, but
for now it's used by walls to delete air where they are built.
* Fix merging, splitting logic for zones
Removing a cell from a zone now correctly reduces its volume.
Adding a cell to a zone now correctly increases its volume.
* Improvements to atmos code, reorganising of types
Moved GasPrototype to shared, because it's going to be used by the
client later.
Split up the atmosphere code. Now zones are explicitly their own kind of
atmosphere, which should speed up some loops and also solve
inconsistencies in the volume calculation.
GasMixtures are another type of atmosphere, for more general use.
Try to fix the splitting/merging code, which was quite cryptic and not
clear at all. It *should* work now.
* Switch zones back to MapIndices
Turns out I'm an idiot who misunderstood the code. MapIndices can be
used as one-per-tile, which is what is needed for atmos. GridCoordinates
are many-per-tile, and were causing lots of problems.
* Add zone debugging overlay
This is the first example of zone information being sent to a client.
It adds the `togglezoneinfo` command, which overlays the tiles and gas
information for the zone currently occupied by the user on the screen.
This was helpful for debugging the GridCoordinates problem.
* Fix position of atmos zone debug text
* Make AirtightComponent only activate on MapInit
This should stop it splitting atmospheres in mapping.
* Doc comments improvements to AtmosphereMap
Fix some malformed comments, inherit some useful docs, document some
more functions.
* Add zone logic for changing tiles to/from space
Zones are now correctly created when all the tiles in a room are built,
and destroyed when one of the tiles is destroyed.
* update engine
* right
* Cleanup code
* Port GasMixture, further cleanup
* Fix windows not being airtight, some other stuff
* Work on atmos
* Difference between ZoneBlocked and AirBlocked
* Big GridAtmosphereManager cleanup, zones are broken now oops
* Remove zones, add excited group implementation
* Further cleanup
* Further work on atmos
* Work on gas overlay.
* PumpGasTo and ReleaseGasTo methods for GasMixture.
* Adds Tile Overlay System.
* More work on atmos
* Gasses spread, equalize and all that
* Fix a few crashes
* Gas can actually spread from room to room after opening airlocks
* Add explosive depressurization, tile prying on depressurization, gas spreading on wall break. Etc.
* More work
* Remove atmoschem, add "performant" gas overlays
* what the fuck git
* More work I guess?
* Fix stuff, create a few (empty) components for future work
* Fix temperature
* Fix tile air sharing
* Atmos optimizations
* Further atmos optimizations
* Even more optimizations!
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Address a few reviews
* Oops, forgot to remove this
* Update Content.Server/Atmos/AtmosphereMap.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Fix compile
* Improved client gas tile overlays
* Less allocations
* Even less allocations!
* some stuff dunno
* Big refactor time, oh yeah
* it truly is 1 AM
* bruh
* No idea why now it doesn't work.
Oh well! I'll fix this on thursday :relieved:
* Basic atmos serialization
* Fix bugs, add VV attributes
* Start adding stuff for gas reactions
* Add a few atmos commands
* Fill gas command
* Changes to gas opacity
* Fixes I guess
* Fixes, add space wind sound
* High pressure movement!
* Better high pressure movements.
* Fix direction, maybe?
* And now it works great
* Science!
* and this is why you don't trust people
* remove logging
* Turns out I'm fucking dumb
* Work on hotspots and reactions, add tritium gas
* IGridAtmosphereComponent interface! For future unsimulated grids.
* Makes atmos updates NoGC.
* C E A S E
* Add settemp atmos command
* Important reminder.
* Remove useless AtmosCooldown.
* More work on hotspots
* Overlays for hotspots. Fire works!
* Turns out I suck at coding
* Fire texture change
* Yeah let's make that an absolute value, hmm?
* Support for atmos after teleporting grid (more or less)
* fix attempt (doesn't actually fix it)
* Make static variable not static
* Remove magic numbers
* Stopwatch moment
* Slight cleanup.
* More cleanup.
* Atmos optimizations
* Fix build
* Remove useless ghost atmos shit
* Adds CanSeeGases component for gas overlay stuff
* Component and prototype ignores
* ExcitedGroups now dispose on being merged with others
* Some tweaking.
* Atmos now uses frame time for updates.
* Nullable boogaloo
* IExamine fix
* Fix build
* Fix restartround
* Atmos tweaking, use invalid direction
* Increase high pressure movement force
* Better sort
* Update submodule.
* NULLABILITY AAAAH
Special thanks to monster860 and all monstermos contributors!
Co-authored-by: Campbell Suter <znix@znix.xyz>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
Co-authored-by: ComicIronic <comicironic@gmail.com>
Co-authored-by: silicons <2003111+silicons@users.noreply.github.com>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
2020-08-02 20:08:20 +02:00
|
|
|
|
{
|
|
|
|
|
|
if (volume < 0)
|
|
|
|
|
|
volume = 0;
|
|
|
|
|
|
Volume = volume;
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
[MethodImpl(MethodImplOptions.AggressiveInlining)]
|
|
|
|
|
|
public void MarkImmutable()
|
|
|
|
|
|
{
|
|
|
|
|
|
Immutable = true;
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
[MethodImpl(MethodImplOptions.AggressiveInlining)]
|
|
|
|
|
|
public float GetMoles(int gasId)
|
|
|
|
|
|
{
|
2021-06-23 11:35:30 +02:00
|
|
|
|
return Moles[gasId];
|
Adds atmos (#1389)
* Add initial atmospherics framework
* Make walls and airlocks airtight
* Add the basic atmosphere gas system
* Atmos: move CardinalToIntVec and Offset into extention methods in EntityNetworkUtils
* Optimize vending machine code a bit.
* Address feedback from Atmos PR, make code compile
Fix use of OnMove -> SnapGridComponent.OnPositionChanged.
Added pause checking to atmos simulations.
* Improvements to the existing ZAS prototype (#996)
* Rename Volume -> Quantity in GasProperty
This makes the name consistent with the rest of the code, given that
it's meant to be a mol value.
* Replace Gas enum with GasPrototype
Unused as of yet, but laying the groundwork for future changes.
* Update AtmosphereMap, improving maths
Adds a temporary default atmosphere, hardcoded in for testing. It will
be replaced eventually.
Fixed a maths mistake in the original code involving unit conversions.
Added the Take() method to IAtmosphere, for taking some volume of
mixture out of a gas mix. This will be pretty handy in the future, but
for now it's used by walls to delete air where they are built.
* Fix merging, splitting logic for zones
Removing a cell from a zone now correctly reduces its volume.
Adding a cell to a zone now correctly increases its volume.
* Improvements to atmos code, reorganising of types
Moved GasPrototype to shared, because it's going to be used by the
client later.
Split up the atmosphere code. Now zones are explicitly their own kind of
atmosphere, which should speed up some loops and also solve
inconsistencies in the volume calculation.
GasMixtures are another type of atmosphere, for more general use.
Try to fix the splitting/merging code, which was quite cryptic and not
clear at all. It *should* work now.
* Switch zones back to MapIndices
Turns out I'm an idiot who misunderstood the code. MapIndices can be
used as one-per-tile, which is what is needed for atmos. GridCoordinates
are many-per-tile, and were causing lots of problems.
* Add zone debugging overlay
This is the first example of zone information being sent to a client.
It adds the `togglezoneinfo` command, which overlays the tiles and gas
information for the zone currently occupied by the user on the screen.
This was helpful for debugging the GridCoordinates problem.
* Fix position of atmos zone debug text
* Make AirtightComponent only activate on MapInit
This should stop it splitting atmospheres in mapping.
* Doc comments improvements to AtmosphereMap
Fix some malformed comments, inherit some useful docs, document some
more functions.
* Add zone logic for changing tiles to/from space
Zones are now correctly created when all the tiles in a room are built,
and destroyed when one of the tiles is destroyed.
* update engine
* right
* Cleanup code
* Port GasMixture, further cleanup
* Fix windows not being airtight, some other stuff
* Work on atmos
* Difference between ZoneBlocked and AirBlocked
* Big GridAtmosphereManager cleanup, zones are broken now oops
* Remove zones, add excited group implementation
* Further cleanup
* Further work on atmos
* Work on gas overlay.
* PumpGasTo and ReleaseGasTo methods for GasMixture.
* Adds Tile Overlay System.
* More work on atmos
* Gasses spread, equalize and all that
* Fix a few crashes
* Gas can actually spread from room to room after opening airlocks
* Add explosive depressurization, tile prying on depressurization, gas spreading on wall break. Etc.
* More work
* Remove atmoschem, add "performant" gas overlays
* what the fuck git
* More work I guess?
* Fix stuff, create a few (empty) components for future work
* Fix temperature
* Fix tile air sharing
* Atmos optimizations
* Further atmos optimizations
* Even more optimizations!
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Address a few reviews
* Oops, forgot to remove this
* Update Content.Server/Atmos/AtmosphereMap.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Fix compile
* Improved client gas tile overlays
* Less allocations
* Even less allocations!
* some stuff dunno
* Big refactor time, oh yeah
* it truly is 1 AM
* bruh
* No idea why now it doesn't work.
Oh well! I'll fix this on thursday :relieved:
* Basic atmos serialization
* Fix bugs, add VV attributes
* Start adding stuff for gas reactions
* Add a few atmos commands
* Fill gas command
* Changes to gas opacity
* Fixes I guess
* Fixes, add space wind sound
* High pressure movement!
* Better high pressure movements.
* Fix direction, maybe?
* And now it works great
* Science!
* and this is why you don't trust people
* remove logging
* Turns out I'm fucking dumb
* Work on hotspots and reactions, add tritium gas
* IGridAtmosphereComponent interface! For future unsimulated grids.
* Makes atmos updates NoGC.
* C E A S E
* Add settemp atmos command
* Important reminder.
* Remove useless AtmosCooldown.
* More work on hotspots
* Overlays for hotspots. Fire works!
* Turns out I suck at coding
* Fire texture change
* Yeah let's make that an absolute value, hmm?
* Support for atmos after teleporting grid (more or less)
* fix attempt (doesn't actually fix it)
* Make static variable not static
* Remove magic numbers
* Stopwatch moment
* Slight cleanup.
* More cleanup.
* Atmos optimizations
* Fix build
* Remove useless ghost atmos shit
* Adds CanSeeGases component for gas overlay stuff
* Component and prototype ignores
* ExcitedGroups now dispose on being merged with others
* Some tweaking.
* Atmos now uses frame time for updates.
* Nullable boogaloo
* IExamine fix
* Fix build
* Fix restartround
* Atmos tweaking, use invalid direction
* Increase high pressure movement force
* Better sort
* Update submodule.
* NULLABILITY AAAAH
Special thanks to monster860 and all monstermos contributors!
Co-authored-by: Campbell Suter <znix@znix.xyz>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
Co-authored-by: ComicIronic <comicironic@gmail.com>
Co-authored-by: silicons <2003111+silicons@users.noreply.github.com>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
2020-08-02 20:08:20 +02:00
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
[MethodImpl(MethodImplOptions.AggressiveInlining)]
|
|
|
|
|
|
public float GetMoles(Gas gas)
|
|
|
|
|
|
{
|
|
|
|
|
|
return GetMoles((int)gas);
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
[MethodImpl(MethodImplOptions.AggressiveInlining)]
|
|
|
|
|
|
public void SetMoles(int gasId, float quantity)
|
|
|
|
|
|
{
|
2021-12-23 01:21:57 +01:00
|
|
|
|
if (!float.IsFinite(quantity) || float.IsNegative(quantity))
|
2020-12-01 10:38:49 +01:00
|
|
|
|
throw new ArgumentException($"Invalid quantity \"{quantity}\" specified!", nameof(quantity));
|
|
|
|
|
|
|
Adds atmos (#1389)
* Add initial atmospherics framework
* Make walls and airlocks airtight
* Add the basic atmosphere gas system
* Atmos: move CardinalToIntVec and Offset into extention methods in EntityNetworkUtils
* Optimize vending machine code a bit.
* Address feedback from Atmos PR, make code compile
Fix use of OnMove -> SnapGridComponent.OnPositionChanged.
Added pause checking to atmos simulations.
* Improvements to the existing ZAS prototype (#996)
* Rename Volume -> Quantity in GasProperty
This makes the name consistent with the rest of the code, given that
it's meant to be a mol value.
* Replace Gas enum with GasPrototype
Unused as of yet, but laying the groundwork for future changes.
* Update AtmosphereMap, improving maths
Adds a temporary default atmosphere, hardcoded in for testing. It will
be replaced eventually.
Fixed a maths mistake in the original code involving unit conversions.
Added the Take() method to IAtmosphere, for taking some volume of
mixture out of a gas mix. This will be pretty handy in the future, but
for now it's used by walls to delete air where they are built.
* Fix merging, splitting logic for zones
Removing a cell from a zone now correctly reduces its volume.
Adding a cell to a zone now correctly increases its volume.
* Improvements to atmos code, reorganising of types
Moved GasPrototype to shared, because it's going to be used by the
client later.
Split up the atmosphere code. Now zones are explicitly their own kind of
atmosphere, which should speed up some loops and also solve
inconsistencies in the volume calculation.
GasMixtures are another type of atmosphere, for more general use.
Try to fix the splitting/merging code, which was quite cryptic and not
clear at all. It *should* work now.
* Switch zones back to MapIndices
Turns out I'm an idiot who misunderstood the code. MapIndices can be
used as one-per-tile, which is what is needed for atmos. GridCoordinates
are many-per-tile, and were causing lots of problems.
* Add zone debugging overlay
This is the first example of zone information being sent to a client.
It adds the `togglezoneinfo` command, which overlays the tiles and gas
information for the zone currently occupied by the user on the screen.
This was helpful for debugging the GridCoordinates problem.
* Fix position of atmos zone debug text
* Make AirtightComponent only activate on MapInit
This should stop it splitting atmospheres in mapping.
* Doc comments improvements to AtmosphereMap
Fix some malformed comments, inherit some useful docs, document some
more functions.
* Add zone logic for changing tiles to/from space
Zones are now correctly created when all the tiles in a room are built,
and destroyed when one of the tiles is destroyed.
* update engine
* right
* Cleanup code
* Port GasMixture, further cleanup
* Fix windows not being airtight, some other stuff
* Work on atmos
* Difference between ZoneBlocked and AirBlocked
* Big GridAtmosphereManager cleanup, zones are broken now oops
* Remove zones, add excited group implementation
* Further cleanup
* Further work on atmos
* Work on gas overlay.
* PumpGasTo and ReleaseGasTo methods for GasMixture.
* Adds Tile Overlay System.
* More work on atmos
* Gasses spread, equalize and all that
* Fix a few crashes
* Gas can actually spread from room to room after opening airlocks
* Add explosive depressurization, tile prying on depressurization, gas spreading on wall break. Etc.
* More work
* Remove atmoschem, add "performant" gas overlays
* what the fuck git
* More work I guess?
* Fix stuff, create a few (empty) components for future work
* Fix temperature
* Fix tile air sharing
* Atmos optimizations
* Further atmos optimizations
* Even more optimizations!
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Address a few reviews
* Oops, forgot to remove this
* Update Content.Server/Atmos/AtmosphereMap.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Fix compile
* Improved client gas tile overlays
* Less allocations
* Even less allocations!
* some stuff dunno
* Big refactor time, oh yeah
* it truly is 1 AM
* bruh
* No idea why now it doesn't work.
Oh well! I'll fix this on thursday :relieved:
* Basic atmos serialization
* Fix bugs, add VV attributes
* Start adding stuff for gas reactions
* Add a few atmos commands
* Fill gas command
* Changes to gas opacity
* Fixes I guess
* Fixes, add space wind sound
* High pressure movement!
* Better high pressure movements.
* Fix direction, maybe?
* And now it works great
* Science!
* and this is why you don't trust people
* remove logging
* Turns out I'm fucking dumb
* Work on hotspots and reactions, add tritium gas
* IGridAtmosphereComponent interface! For future unsimulated grids.
* Makes atmos updates NoGC.
* C E A S E
* Add settemp atmos command
* Important reminder.
* Remove useless AtmosCooldown.
* More work on hotspots
* Overlays for hotspots. Fire works!
* Turns out I suck at coding
* Fire texture change
* Yeah let's make that an absolute value, hmm?
* Support for atmos after teleporting grid (more or less)
* fix attempt (doesn't actually fix it)
* Make static variable not static
* Remove magic numbers
* Stopwatch moment
* Slight cleanup.
* More cleanup.
* Atmos optimizations
* Fix build
* Remove useless ghost atmos shit
* Adds CanSeeGases component for gas overlay stuff
* Component and prototype ignores
* ExcitedGroups now dispose on being merged with others
* Some tweaking.
* Atmos now uses frame time for updates.
* Nullable boogaloo
* IExamine fix
* Fix build
* Fix restartround
* Atmos tweaking, use invalid direction
* Increase high pressure movement force
* Better sort
* Update submodule.
* NULLABILITY AAAAH
Special thanks to monster860 and all monstermos contributors!
Co-authored-by: Campbell Suter <znix@znix.xyz>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
Co-authored-by: ComicIronic <comicironic@gmail.com>
Co-authored-by: silicons <2003111+silicons@users.noreply.github.com>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
2020-08-02 20:08:20 +02:00
|
|
|
|
if (!Immutable)
|
2021-06-23 11:35:30 +02:00
|
|
|
|
Moles[gasId] = quantity;
|
Adds atmos (#1389)
* Add initial atmospherics framework
* Make walls and airlocks airtight
* Add the basic atmosphere gas system
* Atmos: move CardinalToIntVec and Offset into extention methods in EntityNetworkUtils
* Optimize vending machine code a bit.
* Address feedback from Atmos PR, make code compile
Fix use of OnMove -> SnapGridComponent.OnPositionChanged.
Added pause checking to atmos simulations.
* Improvements to the existing ZAS prototype (#996)
* Rename Volume -> Quantity in GasProperty
This makes the name consistent with the rest of the code, given that
it's meant to be a mol value.
* Replace Gas enum with GasPrototype
Unused as of yet, but laying the groundwork for future changes.
* Update AtmosphereMap, improving maths
Adds a temporary default atmosphere, hardcoded in for testing. It will
be replaced eventually.
Fixed a maths mistake in the original code involving unit conversions.
Added the Take() method to IAtmosphere, for taking some volume of
mixture out of a gas mix. This will be pretty handy in the future, but
for now it's used by walls to delete air where they are built.
* Fix merging, splitting logic for zones
Removing a cell from a zone now correctly reduces its volume.
Adding a cell to a zone now correctly increases its volume.
* Improvements to atmos code, reorganising of types
Moved GasPrototype to shared, because it's going to be used by the
client later.
Split up the atmosphere code. Now zones are explicitly their own kind of
atmosphere, which should speed up some loops and also solve
inconsistencies in the volume calculation.
GasMixtures are another type of atmosphere, for more general use.
Try to fix the splitting/merging code, which was quite cryptic and not
clear at all. It *should* work now.
* Switch zones back to MapIndices
Turns out I'm an idiot who misunderstood the code. MapIndices can be
used as one-per-tile, which is what is needed for atmos. GridCoordinates
are many-per-tile, and were causing lots of problems.
* Add zone debugging overlay
This is the first example of zone information being sent to a client.
It adds the `togglezoneinfo` command, which overlays the tiles and gas
information for the zone currently occupied by the user on the screen.
This was helpful for debugging the GridCoordinates problem.
* Fix position of atmos zone debug text
* Make AirtightComponent only activate on MapInit
This should stop it splitting atmospheres in mapping.
* Doc comments improvements to AtmosphereMap
Fix some malformed comments, inherit some useful docs, document some
more functions.
* Add zone logic for changing tiles to/from space
Zones are now correctly created when all the tiles in a room are built,
and destroyed when one of the tiles is destroyed.
* update engine
* right
* Cleanup code
* Port GasMixture, further cleanup
* Fix windows not being airtight, some other stuff
* Work on atmos
* Difference between ZoneBlocked and AirBlocked
* Big GridAtmosphereManager cleanup, zones are broken now oops
* Remove zones, add excited group implementation
* Further cleanup
* Further work on atmos
* Work on gas overlay.
* PumpGasTo and ReleaseGasTo methods for GasMixture.
* Adds Tile Overlay System.
* More work on atmos
* Gasses spread, equalize and all that
* Fix a few crashes
* Gas can actually spread from room to room after opening airlocks
* Add explosive depressurization, tile prying on depressurization, gas spreading on wall break. Etc.
* More work
* Remove atmoschem, add "performant" gas overlays
* what the fuck git
* More work I guess?
* Fix stuff, create a few (empty) components for future work
* Fix temperature
* Fix tile air sharing
* Atmos optimizations
* Further atmos optimizations
* Even more optimizations!
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Address a few reviews
* Oops, forgot to remove this
* Update Content.Server/Atmos/AtmosphereMap.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Fix compile
* Improved client gas tile overlays
* Less allocations
* Even less allocations!
* some stuff dunno
* Big refactor time, oh yeah
* it truly is 1 AM
* bruh
* No idea why now it doesn't work.
Oh well! I'll fix this on thursday :relieved:
* Basic atmos serialization
* Fix bugs, add VV attributes
* Start adding stuff for gas reactions
* Add a few atmos commands
* Fill gas command
* Changes to gas opacity
* Fixes I guess
* Fixes, add space wind sound
* High pressure movement!
* Better high pressure movements.
* Fix direction, maybe?
* And now it works great
* Science!
* and this is why you don't trust people
* remove logging
* Turns out I'm fucking dumb
* Work on hotspots and reactions, add tritium gas
* IGridAtmosphereComponent interface! For future unsimulated grids.
* Makes atmos updates NoGC.
* C E A S E
* Add settemp atmos command
* Important reminder.
* Remove useless AtmosCooldown.
* More work on hotspots
* Overlays for hotspots. Fire works!
* Turns out I suck at coding
* Fire texture change
* Yeah let's make that an absolute value, hmm?
* Support for atmos after teleporting grid (more or less)
* fix attempt (doesn't actually fix it)
* Make static variable not static
* Remove magic numbers
* Stopwatch moment
* Slight cleanup.
* More cleanup.
* Atmos optimizations
* Fix build
* Remove useless ghost atmos shit
* Adds CanSeeGases component for gas overlay stuff
* Component and prototype ignores
* ExcitedGroups now dispose on being merged with others
* Some tweaking.
* Atmos now uses frame time for updates.
* Nullable boogaloo
* IExamine fix
* Fix build
* Fix restartround
* Atmos tweaking, use invalid direction
* Increase high pressure movement force
* Better sort
* Update submodule.
* NULLABILITY AAAAH
Special thanks to monster860 and all monstermos contributors!
Co-authored-by: Campbell Suter <znix@znix.xyz>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
Co-authored-by: ComicIronic <comicironic@gmail.com>
Co-authored-by: silicons <2003111+silicons@users.noreply.github.com>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
2020-08-02 20:08:20 +02:00
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
[MethodImpl(MethodImplOptions.AggressiveInlining)]
|
|
|
|
|
|
public void SetMoles(Gas gas, float quantity)
|
|
|
|
|
|
{
|
|
|
|
|
|
SetMoles((int)gas, quantity);
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
[MethodImpl(MethodImplOptions.AggressiveInlining)]
|
|
|
|
|
|
public void AdjustMoles(int gasId, float quantity)
|
|
|
|
|
|
{
|
|
|
|
|
|
if (!Immutable)
|
2020-12-01 10:38:49 +01:00
|
|
|
|
{
|
2021-12-23 01:21:57 +01:00
|
|
|
|
if (!float.IsFinite(quantity))
|
2020-12-01 10:38:49 +01:00
|
|
|
|
throw new ArgumentException($"Invalid quantity \"{quantity}\" specified!", nameof(quantity));
|
|
|
|
|
|
|
2021-06-23 11:35:30 +02:00
|
|
|
|
Moles[gasId] += quantity;
|
2020-12-01 10:38:49 +01:00
|
|
|
|
|
2021-06-23 11:35:30 +02:00
|
|
|
|
var moles = Moles[gasId];
|
2020-12-01 10:38:49 +01:00
|
|
|
|
|
2021-12-23 01:21:57 +01:00
|
|
|
|
if (!float.IsFinite(moles) || float.IsNegative(moles))
|
2020-12-01 10:38:49 +01:00
|
|
|
|
throw new Exception($"Invalid mole quantity \"{moles}\" in gas Id {gasId} after adjusting moles with \"{quantity}\"!");
|
|
|
|
|
|
}
|
Adds atmos (#1389)
* Add initial atmospherics framework
* Make walls and airlocks airtight
* Add the basic atmosphere gas system
* Atmos: move CardinalToIntVec and Offset into extention methods in EntityNetworkUtils
* Optimize vending machine code a bit.
* Address feedback from Atmos PR, make code compile
Fix use of OnMove -> SnapGridComponent.OnPositionChanged.
Added pause checking to atmos simulations.
* Improvements to the existing ZAS prototype (#996)
* Rename Volume -> Quantity in GasProperty
This makes the name consistent with the rest of the code, given that
it's meant to be a mol value.
* Replace Gas enum with GasPrototype
Unused as of yet, but laying the groundwork for future changes.
* Update AtmosphereMap, improving maths
Adds a temporary default atmosphere, hardcoded in for testing. It will
be replaced eventually.
Fixed a maths mistake in the original code involving unit conversions.
Added the Take() method to IAtmosphere, for taking some volume of
mixture out of a gas mix. This will be pretty handy in the future, but
for now it's used by walls to delete air where they are built.
* Fix merging, splitting logic for zones
Removing a cell from a zone now correctly reduces its volume.
Adding a cell to a zone now correctly increases its volume.
* Improvements to atmos code, reorganising of types
Moved GasPrototype to shared, because it's going to be used by the
client later.
Split up the atmosphere code. Now zones are explicitly their own kind of
atmosphere, which should speed up some loops and also solve
inconsistencies in the volume calculation.
GasMixtures are another type of atmosphere, for more general use.
Try to fix the splitting/merging code, which was quite cryptic and not
clear at all. It *should* work now.
* Switch zones back to MapIndices
Turns out I'm an idiot who misunderstood the code. MapIndices can be
used as one-per-tile, which is what is needed for atmos. GridCoordinates
are many-per-tile, and were causing lots of problems.
* Add zone debugging overlay
This is the first example of zone information being sent to a client.
It adds the `togglezoneinfo` command, which overlays the tiles and gas
information for the zone currently occupied by the user on the screen.
This was helpful for debugging the GridCoordinates problem.
* Fix position of atmos zone debug text
* Make AirtightComponent only activate on MapInit
This should stop it splitting atmospheres in mapping.
* Doc comments improvements to AtmosphereMap
Fix some malformed comments, inherit some useful docs, document some
more functions.
* Add zone logic for changing tiles to/from space
Zones are now correctly created when all the tiles in a room are built,
and destroyed when one of the tiles is destroyed.
* update engine
* right
* Cleanup code
* Port GasMixture, further cleanup
* Fix windows not being airtight, some other stuff
* Work on atmos
* Difference between ZoneBlocked and AirBlocked
* Big GridAtmosphereManager cleanup, zones are broken now oops
* Remove zones, add excited group implementation
* Further cleanup
* Further work on atmos
* Work on gas overlay.
* PumpGasTo and ReleaseGasTo methods for GasMixture.
* Adds Tile Overlay System.
* More work on atmos
* Gasses spread, equalize and all that
* Fix a few crashes
* Gas can actually spread from room to room after opening airlocks
* Add explosive depressurization, tile prying on depressurization, gas spreading on wall break. Etc.
* More work
* Remove atmoschem, add "performant" gas overlays
* what the fuck git
* More work I guess?
* Fix stuff, create a few (empty) components for future work
* Fix temperature
* Fix tile air sharing
* Atmos optimizations
* Further atmos optimizations
* Even more optimizations!
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Address a few reviews
* Oops, forgot to remove this
* Update Content.Server/Atmos/AtmosphereMap.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Fix compile
* Improved client gas tile overlays
* Less allocations
* Even less allocations!
* some stuff dunno
* Big refactor time, oh yeah
* it truly is 1 AM
* bruh
* No idea why now it doesn't work.
Oh well! I'll fix this on thursday :relieved:
* Basic atmos serialization
* Fix bugs, add VV attributes
* Start adding stuff for gas reactions
* Add a few atmos commands
* Fill gas command
* Changes to gas opacity
* Fixes I guess
* Fixes, add space wind sound
* High pressure movement!
* Better high pressure movements.
* Fix direction, maybe?
* And now it works great
* Science!
* and this is why you don't trust people
* remove logging
* Turns out I'm fucking dumb
* Work on hotspots and reactions, add tritium gas
* IGridAtmosphereComponent interface! For future unsimulated grids.
* Makes atmos updates NoGC.
* C E A S E
* Add settemp atmos command
* Important reminder.
* Remove useless AtmosCooldown.
* More work on hotspots
* Overlays for hotspots. Fire works!
* Turns out I suck at coding
* Fire texture change
* Yeah let's make that an absolute value, hmm?
* Support for atmos after teleporting grid (more or less)
* fix attempt (doesn't actually fix it)
* Make static variable not static
* Remove magic numbers
* Stopwatch moment
* Slight cleanup.
* More cleanup.
* Atmos optimizations
* Fix build
* Remove useless ghost atmos shit
* Adds CanSeeGases component for gas overlay stuff
* Component and prototype ignores
* ExcitedGroups now dispose on being merged with others
* Some tweaking.
* Atmos now uses frame time for updates.
* Nullable boogaloo
* IExamine fix
* Fix build
* Fix restartround
* Atmos tweaking, use invalid direction
* Increase high pressure movement force
* Better sort
* Update submodule.
* NULLABILITY AAAAH
Special thanks to monster860 and all monstermos contributors!
Co-authored-by: Campbell Suter <znix@znix.xyz>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
Co-authored-by: ComicIronic <comicironic@gmail.com>
Co-authored-by: silicons <2003111+silicons@users.noreply.github.com>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
2020-08-02 20:08:20 +02:00
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
[MethodImpl(MethodImplOptions.AggressiveInlining)]
|
|
|
|
|
|
public void AdjustMoles(Gas gas, float moles)
|
|
|
|
|
|
{
|
|
|
|
|
|
AdjustMoles((int)gas, moles);
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
[MethodImpl(MethodImplOptions.AggressiveInlining)]
|
|
|
|
|
|
public GasMixture Remove(float amount)
|
|
|
|
|
|
{
|
|
|
|
|
|
return RemoveRatio(amount / TotalMoles);
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
[MethodImpl(MethodImplOptions.AggressiveInlining)]
|
|
|
|
|
|
public GasMixture RemoveRatio(float ratio)
|
|
|
|
|
|
{
|
2020-12-01 10:38:49 +01:00
|
|
|
|
switch (ratio)
|
|
|
|
|
|
{
|
|
|
|
|
|
case <= 0:
|
2021-06-23 11:35:30 +02:00
|
|
|
|
return new GasMixture(Volume){Temperature = Temperature};
|
2020-12-01 10:38:49 +01:00
|
|
|
|
case > 1:
|
|
|
|
|
|
ratio = 1;
|
|
|
|
|
|
break;
|
|
|
|
|
|
}
|
Adds atmos (#1389)
* Add initial atmospherics framework
* Make walls and airlocks airtight
* Add the basic atmosphere gas system
* Atmos: move CardinalToIntVec and Offset into extention methods in EntityNetworkUtils
* Optimize vending machine code a bit.
* Address feedback from Atmos PR, make code compile
Fix use of OnMove -> SnapGridComponent.OnPositionChanged.
Added pause checking to atmos simulations.
* Improvements to the existing ZAS prototype (#996)
* Rename Volume -> Quantity in GasProperty
This makes the name consistent with the rest of the code, given that
it's meant to be a mol value.
* Replace Gas enum with GasPrototype
Unused as of yet, but laying the groundwork for future changes.
* Update AtmosphereMap, improving maths
Adds a temporary default atmosphere, hardcoded in for testing. It will
be replaced eventually.
Fixed a maths mistake in the original code involving unit conversions.
Added the Take() method to IAtmosphere, for taking some volume of
mixture out of a gas mix. This will be pretty handy in the future, but
for now it's used by walls to delete air where they are built.
* Fix merging, splitting logic for zones
Removing a cell from a zone now correctly reduces its volume.
Adding a cell to a zone now correctly increases its volume.
* Improvements to atmos code, reorganising of types
Moved GasPrototype to shared, because it's going to be used by the
client later.
Split up the atmosphere code. Now zones are explicitly their own kind of
atmosphere, which should speed up some loops and also solve
inconsistencies in the volume calculation.
GasMixtures are another type of atmosphere, for more general use.
Try to fix the splitting/merging code, which was quite cryptic and not
clear at all. It *should* work now.
* Switch zones back to MapIndices
Turns out I'm an idiot who misunderstood the code. MapIndices can be
used as one-per-tile, which is what is needed for atmos. GridCoordinates
are many-per-tile, and were causing lots of problems.
* Add zone debugging overlay
This is the first example of zone information being sent to a client.
It adds the `togglezoneinfo` command, which overlays the tiles and gas
information for the zone currently occupied by the user on the screen.
This was helpful for debugging the GridCoordinates problem.
* Fix position of atmos zone debug text
* Make AirtightComponent only activate on MapInit
This should stop it splitting atmospheres in mapping.
* Doc comments improvements to AtmosphereMap
Fix some malformed comments, inherit some useful docs, document some
more functions.
* Add zone logic for changing tiles to/from space
Zones are now correctly created when all the tiles in a room are built,
and destroyed when one of the tiles is destroyed.
* update engine
* right
* Cleanup code
* Port GasMixture, further cleanup
* Fix windows not being airtight, some other stuff
* Work on atmos
* Difference between ZoneBlocked and AirBlocked
* Big GridAtmosphereManager cleanup, zones are broken now oops
* Remove zones, add excited group implementation
* Further cleanup
* Further work on atmos
* Work on gas overlay.
* PumpGasTo and ReleaseGasTo methods for GasMixture.
* Adds Tile Overlay System.
* More work on atmos
* Gasses spread, equalize and all that
* Fix a few crashes
* Gas can actually spread from room to room after opening airlocks
* Add explosive depressurization, tile prying on depressurization, gas spreading on wall break. Etc.
* More work
* Remove atmoschem, add "performant" gas overlays
* what the fuck git
* More work I guess?
* Fix stuff, create a few (empty) components for future work
* Fix temperature
* Fix tile air sharing
* Atmos optimizations
* Further atmos optimizations
* Even more optimizations!
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Address a few reviews
* Oops, forgot to remove this
* Update Content.Server/Atmos/AtmosphereMap.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Fix compile
* Improved client gas tile overlays
* Less allocations
* Even less allocations!
* some stuff dunno
* Big refactor time, oh yeah
* it truly is 1 AM
* bruh
* No idea why now it doesn't work.
Oh well! I'll fix this on thursday :relieved:
* Basic atmos serialization
* Fix bugs, add VV attributes
* Start adding stuff for gas reactions
* Add a few atmos commands
* Fill gas command
* Changes to gas opacity
* Fixes I guess
* Fixes, add space wind sound
* High pressure movement!
* Better high pressure movements.
* Fix direction, maybe?
* And now it works great
* Science!
* and this is why you don't trust people
* remove logging
* Turns out I'm fucking dumb
* Work on hotspots and reactions, add tritium gas
* IGridAtmosphereComponent interface! For future unsimulated grids.
* Makes atmos updates NoGC.
* C E A S E
* Add settemp atmos command
* Important reminder.
* Remove useless AtmosCooldown.
* More work on hotspots
* Overlays for hotspots. Fire works!
* Turns out I suck at coding
* Fire texture change
* Yeah let's make that an absolute value, hmm?
* Support for atmos after teleporting grid (more or less)
* fix attempt (doesn't actually fix it)
* Make static variable not static
* Remove magic numbers
* Stopwatch moment
* Slight cleanup.
* More cleanup.
* Atmos optimizations
* Fix build
* Remove useless ghost atmos shit
* Adds CanSeeGases component for gas overlay stuff
* Component and prototype ignores
* ExcitedGroups now dispose on being merged with others
* Some tweaking.
* Atmos now uses frame time for updates.
* Nullable boogaloo
* IExamine fix
* Fix build
* Fix restartround
* Atmos tweaking, use invalid direction
* Increase high pressure movement force
* Better sort
* Update submodule.
* NULLABILITY AAAAH
Special thanks to monster860 and all monstermos contributors!
Co-authored-by: Campbell Suter <znix@znix.xyz>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
Co-authored-by: ComicIronic <comicironic@gmail.com>
Co-authored-by: silicons <2003111+silicons@users.noreply.github.com>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
2020-08-02 20:08:20 +02:00
|
|
|
|
|
2021-06-23 11:35:30 +02:00
|
|
|
|
var removed = new GasMixture(Volume) { Temperature = Temperature };
|
Adds atmos (#1389)
* Add initial atmospherics framework
* Make walls and airlocks airtight
* Add the basic atmosphere gas system
* Atmos: move CardinalToIntVec and Offset into extention methods in EntityNetworkUtils
* Optimize vending machine code a bit.
* Address feedback from Atmos PR, make code compile
Fix use of OnMove -> SnapGridComponent.OnPositionChanged.
Added pause checking to atmos simulations.
* Improvements to the existing ZAS prototype (#996)
* Rename Volume -> Quantity in GasProperty
This makes the name consistent with the rest of the code, given that
it's meant to be a mol value.
* Replace Gas enum with GasPrototype
Unused as of yet, but laying the groundwork for future changes.
* Update AtmosphereMap, improving maths
Adds a temporary default atmosphere, hardcoded in for testing. It will
be replaced eventually.
Fixed a maths mistake in the original code involving unit conversions.
Added the Take() method to IAtmosphere, for taking some volume of
mixture out of a gas mix. This will be pretty handy in the future, but
for now it's used by walls to delete air where they are built.
* Fix merging, splitting logic for zones
Removing a cell from a zone now correctly reduces its volume.
Adding a cell to a zone now correctly increases its volume.
* Improvements to atmos code, reorganising of types
Moved GasPrototype to shared, because it's going to be used by the
client later.
Split up the atmosphere code. Now zones are explicitly their own kind of
atmosphere, which should speed up some loops and also solve
inconsistencies in the volume calculation.
GasMixtures are another type of atmosphere, for more general use.
Try to fix the splitting/merging code, which was quite cryptic and not
clear at all. It *should* work now.
* Switch zones back to MapIndices
Turns out I'm an idiot who misunderstood the code. MapIndices can be
used as one-per-tile, which is what is needed for atmos. GridCoordinates
are many-per-tile, and were causing lots of problems.
* Add zone debugging overlay
This is the first example of zone information being sent to a client.
It adds the `togglezoneinfo` command, which overlays the tiles and gas
information for the zone currently occupied by the user on the screen.
This was helpful for debugging the GridCoordinates problem.
* Fix position of atmos zone debug text
* Make AirtightComponent only activate on MapInit
This should stop it splitting atmospheres in mapping.
* Doc comments improvements to AtmosphereMap
Fix some malformed comments, inherit some useful docs, document some
more functions.
* Add zone logic for changing tiles to/from space
Zones are now correctly created when all the tiles in a room are built,
and destroyed when one of the tiles is destroyed.
* update engine
* right
* Cleanup code
* Port GasMixture, further cleanup
* Fix windows not being airtight, some other stuff
* Work on atmos
* Difference between ZoneBlocked and AirBlocked
* Big GridAtmosphereManager cleanup, zones are broken now oops
* Remove zones, add excited group implementation
* Further cleanup
* Further work on atmos
* Work on gas overlay.
* PumpGasTo and ReleaseGasTo methods for GasMixture.
* Adds Tile Overlay System.
* More work on atmos
* Gasses spread, equalize and all that
* Fix a few crashes
* Gas can actually spread from room to room after opening airlocks
* Add explosive depressurization, tile prying on depressurization, gas spreading on wall break. Etc.
* More work
* Remove atmoschem, add "performant" gas overlays
* what the fuck git
* More work I guess?
* Fix stuff, create a few (empty) components for future work
* Fix temperature
* Fix tile air sharing
* Atmos optimizations
* Further atmos optimizations
* Even more optimizations!
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Address a few reviews
* Oops, forgot to remove this
* Update Content.Server/Atmos/AtmosphereMap.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Fix compile
* Improved client gas tile overlays
* Less allocations
* Even less allocations!
* some stuff dunno
* Big refactor time, oh yeah
* it truly is 1 AM
* bruh
* No idea why now it doesn't work.
Oh well! I'll fix this on thursday :relieved:
* Basic atmos serialization
* Fix bugs, add VV attributes
* Start adding stuff for gas reactions
* Add a few atmos commands
* Fill gas command
* Changes to gas opacity
* Fixes I guess
* Fixes, add space wind sound
* High pressure movement!
* Better high pressure movements.
* Fix direction, maybe?
* And now it works great
* Science!
* and this is why you don't trust people
* remove logging
* Turns out I'm fucking dumb
* Work on hotspots and reactions, add tritium gas
* IGridAtmosphereComponent interface! For future unsimulated grids.
* Makes atmos updates NoGC.
* C E A S E
* Add settemp atmos command
* Important reminder.
* Remove useless AtmosCooldown.
* More work on hotspots
* Overlays for hotspots. Fire works!
* Turns out I suck at coding
* Fire texture change
* Yeah let's make that an absolute value, hmm?
* Support for atmos after teleporting grid (more or less)
* fix attempt (doesn't actually fix it)
* Make static variable not static
* Remove magic numbers
* Stopwatch moment
* Slight cleanup.
* More cleanup.
* Atmos optimizations
* Fix build
* Remove useless ghost atmos shit
* Adds CanSeeGases component for gas overlay stuff
* Component and prototype ignores
* ExcitedGroups now dispose on being merged with others
* Some tweaking.
* Atmos now uses frame time for updates.
* Nullable boogaloo
* IExamine fix
* Fix build
* Fix restartround
* Atmos tweaking, use invalid direction
* Increase high pressure movement force
* Better sort
* Update submodule.
* NULLABILITY AAAAH
Special thanks to monster860 and all monstermos contributors!
Co-authored-by: Campbell Suter <znix@znix.xyz>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
Co-authored-by: ComicIronic <comicironic@gmail.com>
Co-authored-by: silicons <2003111+silicons@users.noreply.github.com>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
2020-08-02 20:08:20 +02:00
|
|
|
|
|
2021-06-23 11:35:30 +02:00
|
|
|
|
Moles.CopyTo(removed.Moles.AsSpan());
|
|
|
|
|
|
NumericsHelpers.Multiply(removed.Moles, ratio);
|
2020-11-25 10:48:49 +01:00
|
|
|
|
if (!Immutable)
|
2021-06-23 11:35:30 +02:00
|
|
|
|
NumericsHelpers.Sub(Moles, removed.Moles);
|
Adds atmos (#1389)
* Add initial atmospherics framework
* Make walls and airlocks airtight
* Add the basic atmosphere gas system
* Atmos: move CardinalToIntVec and Offset into extention methods in EntityNetworkUtils
* Optimize vending machine code a bit.
* Address feedback from Atmos PR, make code compile
Fix use of OnMove -> SnapGridComponent.OnPositionChanged.
Added pause checking to atmos simulations.
* Improvements to the existing ZAS prototype (#996)
* Rename Volume -> Quantity in GasProperty
This makes the name consistent with the rest of the code, given that
it's meant to be a mol value.
* Replace Gas enum with GasPrototype
Unused as of yet, but laying the groundwork for future changes.
* Update AtmosphereMap, improving maths
Adds a temporary default atmosphere, hardcoded in for testing. It will
be replaced eventually.
Fixed a maths mistake in the original code involving unit conversions.
Added the Take() method to IAtmosphere, for taking some volume of
mixture out of a gas mix. This will be pretty handy in the future, but
for now it's used by walls to delete air where they are built.
* Fix merging, splitting logic for zones
Removing a cell from a zone now correctly reduces its volume.
Adding a cell to a zone now correctly increases its volume.
* Improvements to atmos code, reorganising of types
Moved GasPrototype to shared, because it's going to be used by the
client later.
Split up the atmosphere code. Now zones are explicitly their own kind of
atmosphere, which should speed up some loops and also solve
inconsistencies in the volume calculation.
GasMixtures are another type of atmosphere, for more general use.
Try to fix the splitting/merging code, which was quite cryptic and not
clear at all. It *should* work now.
* Switch zones back to MapIndices
Turns out I'm an idiot who misunderstood the code. MapIndices can be
used as one-per-tile, which is what is needed for atmos. GridCoordinates
are many-per-tile, and were causing lots of problems.
* Add zone debugging overlay
This is the first example of zone information being sent to a client.
It adds the `togglezoneinfo` command, which overlays the tiles and gas
information for the zone currently occupied by the user on the screen.
This was helpful for debugging the GridCoordinates problem.
* Fix position of atmos zone debug text
* Make AirtightComponent only activate on MapInit
This should stop it splitting atmospheres in mapping.
* Doc comments improvements to AtmosphereMap
Fix some malformed comments, inherit some useful docs, document some
more functions.
* Add zone logic for changing tiles to/from space
Zones are now correctly created when all the tiles in a room are built,
and destroyed when one of the tiles is destroyed.
* update engine
* right
* Cleanup code
* Port GasMixture, further cleanup
* Fix windows not being airtight, some other stuff
* Work on atmos
* Difference between ZoneBlocked and AirBlocked
* Big GridAtmosphereManager cleanup, zones are broken now oops
* Remove zones, add excited group implementation
* Further cleanup
* Further work on atmos
* Work on gas overlay.
* PumpGasTo and ReleaseGasTo methods for GasMixture.
* Adds Tile Overlay System.
* More work on atmos
* Gasses spread, equalize and all that
* Fix a few crashes
* Gas can actually spread from room to room after opening airlocks
* Add explosive depressurization, tile prying on depressurization, gas spreading on wall break. Etc.
* More work
* Remove atmoschem, add "performant" gas overlays
* what the fuck git
* More work I guess?
* Fix stuff, create a few (empty) components for future work
* Fix temperature
* Fix tile air sharing
* Atmos optimizations
* Further atmos optimizations
* Even more optimizations!
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Address a few reviews
* Oops, forgot to remove this
* Update Content.Server/Atmos/AtmosphereMap.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Fix compile
* Improved client gas tile overlays
* Less allocations
* Even less allocations!
* some stuff dunno
* Big refactor time, oh yeah
* it truly is 1 AM
* bruh
* No idea why now it doesn't work.
Oh well! I'll fix this on thursday :relieved:
* Basic atmos serialization
* Fix bugs, add VV attributes
* Start adding stuff for gas reactions
* Add a few atmos commands
* Fill gas command
* Changes to gas opacity
* Fixes I guess
* Fixes, add space wind sound
* High pressure movement!
* Better high pressure movements.
* Fix direction, maybe?
* And now it works great
* Science!
* and this is why you don't trust people
* remove logging
* Turns out I'm fucking dumb
* Work on hotspots and reactions, add tritium gas
* IGridAtmosphereComponent interface! For future unsimulated grids.
* Makes atmos updates NoGC.
* C E A S E
* Add settemp atmos command
* Important reminder.
* Remove useless AtmosCooldown.
* More work on hotspots
* Overlays for hotspots. Fire works!
* Turns out I suck at coding
* Fire texture change
* Yeah let's make that an absolute value, hmm?
* Support for atmos after teleporting grid (more or less)
* fix attempt (doesn't actually fix it)
* Make static variable not static
* Remove magic numbers
* Stopwatch moment
* Slight cleanup.
* More cleanup.
* Atmos optimizations
* Fix build
* Remove useless ghost atmos shit
* Adds CanSeeGases component for gas overlay stuff
* Component and prototype ignores
* ExcitedGroups now dispose on being merged with others
* Some tweaking.
* Atmos now uses frame time for updates.
* Nullable boogaloo
* IExamine fix
* Fix build
* Fix restartround
* Atmos tweaking, use invalid direction
* Increase high pressure movement force
* Better sort
* Update submodule.
* NULLABILITY AAAAH
Special thanks to monster860 and all monstermos contributors!
Co-authored-by: Campbell Suter <znix@znix.xyz>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
Co-authored-by: ComicIronic <comicironic@gmail.com>
Co-authored-by: silicons <2003111+silicons@users.noreply.github.com>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
2020-08-02 20:08:20 +02:00
|
|
|
|
|
2021-06-23 11:35:30 +02:00
|
|
|
|
for (var i = 0; i < Moles.Length; i++)
|
2020-11-26 12:39:13 +01:00
|
|
|
|
{
|
2021-06-23 11:35:30 +02:00
|
|
|
|
var moles = Moles[i];
|
|
|
|
|
|
var otherMoles = removed.Moles[i];
|
2020-12-01 10:38:49 +01:00
|
|
|
|
if (moles < Atmospherics.GasMinMoles || float.IsNaN(moles))
|
2021-06-23 11:35:30 +02:00
|
|
|
|
Moles[i] = 0;
|
2020-11-26 12:39:13 +01:00
|
|
|
|
|
2020-12-01 10:38:49 +01:00
|
|
|
|
if (otherMoles < Atmospherics.GasMinMoles || float.IsNaN(otherMoles))
|
2021-06-23 11:35:30 +02:00
|
|
|
|
removed.Moles[i] = 0;
|
2020-11-26 12:39:13 +01:00
|
|
|
|
}
|
|
|
|
|
|
|
Adds atmos (#1389)
* Add initial atmospherics framework
* Make walls and airlocks airtight
* Add the basic atmosphere gas system
* Atmos: move CardinalToIntVec and Offset into extention methods in EntityNetworkUtils
* Optimize vending machine code a bit.
* Address feedback from Atmos PR, make code compile
Fix use of OnMove -> SnapGridComponent.OnPositionChanged.
Added pause checking to atmos simulations.
* Improvements to the existing ZAS prototype (#996)
* Rename Volume -> Quantity in GasProperty
This makes the name consistent with the rest of the code, given that
it's meant to be a mol value.
* Replace Gas enum with GasPrototype
Unused as of yet, but laying the groundwork for future changes.
* Update AtmosphereMap, improving maths
Adds a temporary default atmosphere, hardcoded in for testing. It will
be replaced eventually.
Fixed a maths mistake in the original code involving unit conversions.
Added the Take() method to IAtmosphere, for taking some volume of
mixture out of a gas mix. This will be pretty handy in the future, but
for now it's used by walls to delete air where they are built.
* Fix merging, splitting logic for zones
Removing a cell from a zone now correctly reduces its volume.
Adding a cell to a zone now correctly increases its volume.
* Improvements to atmos code, reorganising of types
Moved GasPrototype to shared, because it's going to be used by the
client later.
Split up the atmosphere code. Now zones are explicitly their own kind of
atmosphere, which should speed up some loops and also solve
inconsistencies in the volume calculation.
GasMixtures are another type of atmosphere, for more general use.
Try to fix the splitting/merging code, which was quite cryptic and not
clear at all. It *should* work now.
* Switch zones back to MapIndices
Turns out I'm an idiot who misunderstood the code. MapIndices can be
used as one-per-tile, which is what is needed for atmos. GridCoordinates
are many-per-tile, and were causing lots of problems.
* Add zone debugging overlay
This is the first example of zone information being sent to a client.
It adds the `togglezoneinfo` command, which overlays the tiles and gas
information for the zone currently occupied by the user on the screen.
This was helpful for debugging the GridCoordinates problem.
* Fix position of atmos zone debug text
* Make AirtightComponent only activate on MapInit
This should stop it splitting atmospheres in mapping.
* Doc comments improvements to AtmosphereMap
Fix some malformed comments, inherit some useful docs, document some
more functions.
* Add zone logic for changing tiles to/from space
Zones are now correctly created when all the tiles in a room are built,
and destroyed when one of the tiles is destroyed.
* update engine
* right
* Cleanup code
* Port GasMixture, further cleanup
* Fix windows not being airtight, some other stuff
* Work on atmos
* Difference between ZoneBlocked and AirBlocked
* Big GridAtmosphereManager cleanup, zones are broken now oops
* Remove zones, add excited group implementation
* Further cleanup
* Further work on atmos
* Work on gas overlay.
* PumpGasTo and ReleaseGasTo methods for GasMixture.
* Adds Tile Overlay System.
* More work on atmos
* Gasses spread, equalize and all that
* Fix a few crashes
* Gas can actually spread from room to room after opening airlocks
* Add explosive depressurization, tile prying on depressurization, gas spreading on wall break. Etc.
* More work
* Remove atmoschem, add "performant" gas overlays
* what the fuck git
* More work I guess?
* Fix stuff, create a few (empty) components for future work
* Fix temperature
* Fix tile air sharing
* Atmos optimizations
* Further atmos optimizations
* Even more optimizations!
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Address a few reviews
* Oops, forgot to remove this
* Update Content.Server/Atmos/AtmosphereMap.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Fix compile
* Improved client gas tile overlays
* Less allocations
* Even less allocations!
* some stuff dunno
* Big refactor time, oh yeah
* it truly is 1 AM
* bruh
* No idea why now it doesn't work.
Oh well! I'll fix this on thursday :relieved:
* Basic atmos serialization
* Fix bugs, add VV attributes
* Start adding stuff for gas reactions
* Add a few atmos commands
* Fill gas command
* Changes to gas opacity
* Fixes I guess
* Fixes, add space wind sound
* High pressure movement!
* Better high pressure movements.
* Fix direction, maybe?
* And now it works great
* Science!
* and this is why you don't trust people
* remove logging
* Turns out I'm fucking dumb
* Work on hotspots and reactions, add tritium gas
* IGridAtmosphereComponent interface! For future unsimulated grids.
* Makes atmos updates NoGC.
* C E A S E
* Add settemp atmos command
* Important reminder.
* Remove useless AtmosCooldown.
* More work on hotspots
* Overlays for hotspots. Fire works!
* Turns out I suck at coding
* Fire texture change
* Yeah let's make that an absolute value, hmm?
* Support for atmos after teleporting grid (more or less)
* fix attempt (doesn't actually fix it)
* Make static variable not static
* Remove magic numbers
* Stopwatch moment
* Slight cleanup.
* More cleanup.
* Atmos optimizations
* Fix build
* Remove useless ghost atmos shit
* Adds CanSeeGases component for gas overlay stuff
* Component and prototype ignores
* ExcitedGroups now dispose on being merged with others
* Some tweaking.
* Atmos now uses frame time for updates.
* Nullable boogaloo
* IExamine fix
* Fix build
* Fix restartround
* Atmos tweaking, use invalid direction
* Increase high pressure movement force
* Better sort
* Update submodule.
* NULLABILITY AAAAH
Special thanks to monster860 and all monstermos contributors!
Co-authored-by: Campbell Suter <znix@znix.xyz>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
Co-authored-by: ComicIronic <comicironic@gmail.com>
Co-authored-by: silicons <2003111+silicons@users.noreply.github.com>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
2020-08-02 20:08:20 +02:00
|
|
|
|
return removed;
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
[MethodImpl(MethodImplOptions.AggressiveInlining)]
|
|
|
|
|
|
public void CopyFromMutable(GasMixture sample)
|
|
|
|
|
|
{
|
|
|
|
|
|
if (Immutable) return;
|
2021-06-23 11:35:30 +02:00
|
|
|
|
sample.Moles.CopyTo(Moles, 0);
|
Adds atmos (#1389)
* Add initial atmospherics framework
* Make walls and airlocks airtight
* Add the basic atmosphere gas system
* Atmos: move CardinalToIntVec and Offset into extention methods in EntityNetworkUtils
* Optimize vending machine code a bit.
* Address feedback from Atmos PR, make code compile
Fix use of OnMove -> SnapGridComponent.OnPositionChanged.
Added pause checking to atmos simulations.
* Improvements to the existing ZAS prototype (#996)
* Rename Volume -> Quantity in GasProperty
This makes the name consistent with the rest of the code, given that
it's meant to be a mol value.
* Replace Gas enum with GasPrototype
Unused as of yet, but laying the groundwork for future changes.
* Update AtmosphereMap, improving maths
Adds a temporary default atmosphere, hardcoded in for testing. It will
be replaced eventually.
Fixed a maths mistake in the original code involving unit conversions.
Added the Take() method to IAtmosphere, for taking some volume of
mixture out of a gas mix. This will be pretty handy in the future, but
for now it's used by walls to delete air where they are built.
* Fix merging, splitting logic for zones
Removing a cell from a zone now correctly reduces its volume.
Adding a cell to a zone now correctly increases its volume.
* Improvements to atmos code, reorganising of types
Moved GasPrototype to shared, because it's going to be used by the
client later.
Split up the atmosphere code. Now zones are explicitly their own kind of
atmosphere, which should speed up some loops and also solve
inconsistencies in the volume calculation.
GasMixtures are another type of atmosphere, for more general use.
Try to fix the splitting/merging code, which was quite cryptic and not
clear at all. It *should* work now.
* Switch zones back to MapIndices
Turns out I'm an idiot who misunderstood the code. MapIndices can be
used as one-per-tile, which is what is needed for atmos. GridCoordinates
are many-per-tile, and were causing lots of problems.
* Add zone debugging overlay
This is the first example of zone information being sent to a client.
It adds the `togglezoneinfo` command, which overlays the tiles and gas
information for the zone currently occupied by the user on the screen.
This was helpful for debugging the GridCoordinates problem.
* Fix position of atmos zone debug text
* Make AirtightComponent only activate on MapInit
This should stop it splitting atmospheres in mapping.
* Doc comments improvements to AtmosphereMap
Fix some malformed comments, inherit some useful docs, document some
more functions.
* Add zone logic for changing tiles to/from space
Zones are now correctly created when all the tiles in a room are built,
and destroyed when one of the tiles is destroyed.
* update engine
* right
* Cleanup code
* Port GasMixture, further cleanup
* Fix windows not being airtight, some other stuff
* Work on atmos
* Difference between ZoneBlocked and AirBlocked
* Big GridAtmosphereManager cleanup, zones are broken now oops
* Remove zones, add excited group implementation
* Further cleanup
* Further work on atmos
* Work on gas overlay.
* PumpGasTo and ReleaseGasTo methods for GasMixture.
* Adds Tile Overlay System.
* More work on atmos
* Gasses spread, equalize and all that
* Fix a few crashes
* Gas can actually spread from room to room after opening airlocks
* Add explosive depressurization, tile prying on depressurization, gas spreading on wall break. Etc.
* More work
* Remove atmoschem, add "performant" gas overlays
* what the fuck git
* More work I guess?
* Fix stuff, create a few (empty) components for future work
* Fix temperature
* Fix tile air sharing
* Atmos optimizations
* Further atmos optimizations
* Even more optimizations!
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Address a few reviews
* Oops, forgot to remove this
* Update Content.Server/Atmos/AtmosphereMap.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Fix compile
* Improved client gas tile overlays
* Less allocations
* Even less allocations!
* some stuff dunno
* Big refactor time, oh yeah
* it truly is 1 AM
* bruh
* No idea why now it doesn't work.
Oh well! I'll fix this on thursday :relieved:
* Basic atmos serialization
* Fix bugs, add VV attributes
* Start adding stuff for gas reactions
* Add a few atmos commands
* Fill gas command
* Changes to gas opacity
* Fixes I guess
* Fixes, add space wind sound
* High pressure movement!
* Better high pressure movements.
* Fix direction, maybe?
* And now it works great
* Science!
* and this is why you don't trust people
* remove logging
* Turns out I'm fucking dumb
* Work on hotspots and reactions, add tritium gas
* IGridAtmosphereComponent interface! For future unsimulated grids.
* Makes atmos updates NoGC.
* C E A S E
* Add settemp atmos command
* Important reminder.
* Remove useless AtmosCooldown.
* More work on hotspots
* Overlays for hotspots. Fire works!
* Turns out I suck at coding
* Fire texture change
* Yeah let's make that an absolute value, hmm?
* Support for atmos after teleporting grid (more or less)
* fix attempt (doesn't actually fix it)
* Make static variable not static
* Remove magic numbers
* Stopwatch moment
* Slight cleanup.
* More cleanup.
* Atmos optimizations
* Fix build
* Remove useless ghost atmos shit
* Adds CanSeeGases component for gas overlay stuff
* Component and prototype ignores
* ExcitedGroups now dispose on being merged with others
* Some tweaking.
* Atmos now uses frame time for updates.
* Nullable boogaloo
* IExamine fix
* Fix build
* Fix restartround
* Atmos tweaking, use invalid direction
* Increase high pressure movement force
* Better sort
* Update submodule.
* NULLABILITY AAAAH
Special thanks to monster860 and all monstermos contributors!
Co-authored-by: Campbell Suter <znix@znix.xyz>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
Co-authored-by: ComicIronic <comicironic@gmail.com>
Co-authored-by: silicons <2003111+silicons@users.noreply.github.com>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
2020-08-02 20:08:20 +02:00
|
|
|
|
Temperature = sample.Temperature;
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
[MethodImpl(MethodImplOptions.AggressiveInlining)]
|
|
|
|
|
|
public void Clear()
|
|
|
|
|
|
{
|
|
|
|
|
|
if (Immutable) return;
|
2021-06-23 11:35:30 +02:00
|
|
|
|
Array.Clear(Moles, 0, Atmospherics.TotalNumberOfGases);
|
Adds atmos (#1389)
* Add initial atmospherics framework
* Make walls and airlocks airtight
* Add the basic atmosphere gas system
* Atmos: move CardinalToIntVec and Offset into extention methods in EntityNetworkUtils
* Optimize vending machine code a bit.
* Address feedback from Atmos PR, make code compile
Fix use of OnMove -> SnapGridComponent.OnPositionChanged.
Added pause checking to atmos simulations.
* Improvements to the existing ZAS prototype (#996)
* Rename Volume -> Quantity in GasProperty
This makes the name consistent with the rest of the code, given that
it's meant to be a mol value.
* Replace Gas enum with GasPrototype
Unused as of yet, but laying the groundwork for future changes.
* Update AtmosphereMap, improving maths
Adds a temporary default atmosphere, hardcoded in for testing. It will
be replaced eventually.
Fixed a maths mistake in the original code involving unit conversions.
Added the Take() method to IAtmosphere, for taking some volume of
mixture out of a gas mix. This will be pretty handy in the future, but
for now it's used by walls to delete air where they are built.
* Fix merging, splitting logic for zones
Removing a cell from a zone now correctly reduces its volume.
Adding a cell to a zone now correctly increases its volume.
* Improvements to atmos code, reorganising of types
Moved GasPrototype to shared, because it's going to be used by the
client later.
Split up the atmosphere code. Now zones are explicitly their own kind of
atmosphere, which should speed up some loops and also solve
inconsistencies in the volume calculation.
GasMixtures are another type of atmosphere, for more general use.
Try to fix the splitting/merging code, which was quite cryptic and not
clear at all. It *should* work now.
* Switch zones back to MapIndices
Turns out I'm an idiot who misunderstood the code. MapIndices can be
used as one-per-tile, which is what is needed for atmos. GridCoordinates
are many-per-tile, and were causing lots of problems.
* Add zone debugging overlay
This is the first example of zone information being sent to a client.
It adds the `togglezoneinfo` command, which overlays the tiles and gas
information for the zone currently occupied by the user on the screen.
This was helpful for debugging the GridCoordinates problem.
* Fix position of atmos zone debug text
* Make AirtightComponent only activate on MapInit
This should stop it splitting atmospheres in mapping.
* Doc comments improvements to AtmosphereMap
Fix some malformed comments, inherit some useful docs, document some
more functions.
* Add zone logic for changing tiles to/from space
Zones are now correctly created when all the tiles in a room are built,
and destroyed when one of the tiles is destroyed.
* update engine
* right
* Cleanup code
* Port GasMixture, further cleanup
* Fix windows not being airtight, some other stuff
* Work on atmos
* Difference between ZoneBlocked and AirBlocked
* Big GridAtmosphereManager cleanup, zones are broken now oops
* Remove zones, add excited group implementation
* Further cleanup
* Further work on atmos
* Work on gas overlay.
* PumpGasTo and ReleaseGasTo methods for GasMixture.
* Adds Tile Overlay System.
* More work on atmos
* Gasses spread, equalize and all that
* Fix a few crashes
* Gas can actually spread from room to room after opening airlocks
* Add explosive depressurization, tile prying on depressurization, gas spreading on wall break. Etc.
* More work
* Remove atmoschem, add "performant" gas overlays
* what the fuck git
* More work I guess?
* Fix stuff, create a few (empty) components for future work
* Fix temperature
* Fix tile air sharing
* Atmos optimizations
* Further atmos optimizations
* Even more optimizations!
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Address a few reviews
* Oops, forgot to remove this
* Update Content.Server/Atmos/AtmosphereMap.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Fix compile
* Improved client gas tile overlays
* Less allocations
* Even less allocations!
* some stuff dunno
* Big refactor time, oh yeah
* it truly is 1 AM
* bruh
* No idea why now it doesn't work.
Oh well! I'll fix this on thursday :relieved:
* Basic atmos serialization
* Fix bugs, add VV attributes
* Start adding stuff for gas reactions
* Add a few atmos commands
* Fill gas command
* Changes to gas opacity
* Fixes I guess
* Fixes, add space wind sound
* High pressure movement!
* Better high pressure movements.
* Fix direction, maybe?
* And now it works great
* Science!
* and this is why you don't trust people
* remove logging
* Turns out I'm fucking dumb
* Work on hotspots and reactions, add tritium gas
* IGridAtmosphereComponent interface! For future unsimulated grids.
* Makes atmos updates NoGC.
* C E A S E
* Add settemp atmos command
* Important reminder.
* Remove useless AtmosCooldown.
* More work on hotspots
* Overlays for hotspots. Fire works!
* Turns out I suck at coding
* Fire texture change
* Yeah let's make that an absolute value, hmm?
* Support for atmos after teleporting grid (more or less)
* fix attempt (doesn't actually fix it)
* Make static variable not static
* Remove magic numbers
* Stopwatch moment
* Slight cleanup.
* More cleanup.
* Atmos optimizations
* Fix build
* Remove useless ghost atmos shit
* Adds CanSeeGases component for gas overlay stuff
* Component and prototype ignores
* ExcitedGroups now dispose on being merged with others
* Some tweaking.
* Atmos now uses frame time for updates.
* Nullable boogaloo
* IExamine fix
* Fix build
* Fix restartround
* Atmos tweaking, use invalid direction
* Increase high pressure movement force
* Better sort
* Update submodule.
* NULLABILITY AAAAH
Special thanks to monster860 and all monstermos contributors!
Co-authored-by: Campbell Suter <znix@znix.xyz>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
Co-authored-by: ComicIronic <comicironic@gmail.com>
Co-authored-by: silicons <2003111+silicons@users.noreply.github.com>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
2020-08-02 20:08:20 +02:00
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
[MethodImpl(MethodImplOptions.AggressiveInlining)]
|
|
|
|
|
|
public void Multiply(float multiplier)
|
|
|
|
|
|
{
|
|
|
|
|
|
if (Immutable) return;
|
2021-06-23 11:35:30 +02:00
|
|
|
|
NumericsHelpers.Multiply(Moles, multiplier);
|
Adds atmos (#1389)
* Add initial atmospherics framework
* Make walls and airlocks airtight
* Add the basic atmosphere gas system
* Atmos: move CardinalToIntVec and Offset into extention methods in EntityNetworkUtils
* Optimize vending machine code a bit.
* Address feedback from Atmos PR, make code compile
Fix use of OnMove -> SnapGridComponent.OnPositionChanged.
Added pause checking to atmos simulations.
* Improvements to the existing ZAS prototype (#996)
* Rename Volume -> Quantity in GasProperty
This makes the name consistent with the rest of the code, given that
it's meant to be a mol value.
* Replace Gas enum with GasPrototype
Unused as of yet, but laying the groundwork for future changes.
* Update AtmosphereMap, improving maths
Adds a temporary default atmosphere, hardcoded in for testing. It will
be replaced eventually.
Fixed a maths mistake in the original code involving unit conversions.
Added the Take() method to IAtmosphere, for taking some volume of
mixture out of a gas mix. This will be pretty handy in the future, but
for now it's used by walls to delete air where they are built.
* Fix merging, splitting logic for zones
Removing a cell from a zone now correctly reduces its volume.
Adding a cell to a zone now correctly increases its volume.
* Improvements to atmos code, reorganising of types
Moved GasPrototype to shared, because it's going to be used by the
client later.
Split up the atmosphere code. Now zones are explicitly their own kind of
atmosphere, which should speed up some loops and also solve
inconsistencies in the volume calculation.
GasMixtures are another type of atmosphere, for more general use.
Try to fix the splitting/merging code, which was quite cryptic and not
clear at all. It *should* work now.
* Switch zones back to MapIndices
Turns out I'm an idiot who misunderstood the code. MapIndices can be
used as one-per-tile, which is what is needed for atmos. GridCoordinates
are many-per-tile, and were causing lots of problems.
* Add zone debugging overlay
This is the first example of zone information being sent to a client.
It adds the `togglezoneinfo` command, which overlays the tiles and gas
information for the zone currently occupied by the user on the screen.
This was helpful for debugging the GridCoordinates problem.
* Fix position of atmos zone debug text
* Make AirtightComponent only activate on MapInit
This should stop it splitting atmospheres in mapping.
* Doc comments improvements to AtmosphereMap
Fix some malformed comments, inherit some useful docs, document some
more functions.
* Add zone logic for changing tiles to/from space
Zones are now correctly created when all the tiles in a room are built,
and destroyed when one of the tiles is destroyed.
* update engine
* right
* Cleanup code
* Port GasMixture, further cleanup
* Fix windows not being airtight, some other stuff
* Work on atmos
* Difference between ZoneBlocked and AirBlocked
* Big GridAtmosphereManager cleanup, zones are broken now oops
* Remove zones, add excited group implementation
* Further cleanup
* Further work on atmos
* Work on gas overlay.
* PumpGasTo and ReleaseGasTo methods for GasMixture.
* Adds Tile Overlay System.
* More work on atmos
* Gasses spread, equalize and all that
* Fix a few crashes
* Gas can actually spread from room to room after opening airlocks
* Add explosive depressurization, tile prying on depressurization, gas spreading on wall break. Etc.
* More work
* Remove atmoschem, add "performant" gas overlays
* what the fuck git
* More work I guess?
* Fix stuff, create a few (empty) components for future work
* Fix temperature
* Fix tile air sharing
* Atmos optimizations
* Further atmos optimizations
* Even more optimizations!
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Address a few reviews
* Oops, forgot to remove this
* Update Content.Server/Atmos/AtmosphereMap.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Fix compile
* Improved client gas tile overlays
* Less allocations
* Even less allocations!
* some stuff dunno
* Big refactor time, oh yeah
* it truly is 1 AM
* bruh
* No idea why now it doesn't work.
Oh well! I'll fix this on thursday :relieved:
* Basic atmos serialization
* Fix bugs, add VV attributes
* Start adding stuff for gas reactions
* Add a few atmos commands
* Fill gas command
* Changes to gas opacity
* Fixes I guess
* Fixes, add space wind sound
* High pressure movement!
* Better high pressure movements.
* Fix direction, maybe?
* And now it works great
* Science!
* and this is why you don't trust people
* remove logging
* Turns out I'm fucking dumb
* Work on hotspots and reactions, add tritium gas
* IGridAtmosphereComponent interface! For future unsimulated grids.
* Makes atmos updates NoGC.
* C E A S E
* Add settemp atmos command
* Important reminder.
* Remove useless AtmosCooldown.
* More work on hotspots
* Overlays for hotspots. Fire works!
* Turns out I suck at coding
* Fire texture change
* Yeah let's make that an absolute value, hmm?
* Support for atmos after teleporting grid (more or less)
* fix attempt (doesn't actually fix it)
* Make static variable not static
* Remove magic numbers
* Stopwatch moment
* Slight cleanup.
* More cleanup.
* Atmos optimizations
* Fix build
* Remove useless ghost atmos shit
* Adds CanSeeGases component for gas overlay stuff
* Component and prototype ignores
* ExcitedGroups now dispose on being merged with others
* Some tweaking.
* Atmos now uses frame time for updates.
* Nullable boogaloo
* IExamine fix
* Fix build
* Fix restartround
* Atmos tweaking, use invalid direction
* Increase high pressure movement force
* Better sort
* Update submodule.
* NULLABILITY AAAAH
Special thanks to monster860 and all monstermos contributors!
Co-authored-by: Campbell Suter <znix@znix.xyz>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
Co-authored-by: ComicIronic <comicironic@gmail.com>
Co-authored-by: silicons <2003111+silicons@users.noreply.github.com>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
2020-08-02 20:08:20 +02:00
|
|
|
|
}
|
|
|
|
|
|
|
2021-03-05 01:08:38 +01:00
|
|
|
|
void ISerializationHooks.AfterDeserialization()
|
Adds atmos (#1389)
* Add initial atmospherics framework
* Make walls and airlocks airtight
* Add the basic atmosphere gas system
* Atmos: move CardinalToIntVec and Offset into extention methods in EntityNetworkUtils
* Optimize vending machine code a bit.
* Address feedback from Atmos PR, make code compile
Fix use of OnMove -> SnapGridComponent.OnPositionChanged.
Added pause checking to atmos simulations.
* Improvements to the existing ZAS prototype (#996)
* Rename Volume -> Quantity in GasProperty
This makes the name consistent with the rest of the code, given that
it's meant to be a mol value.
* Replace Gas enum with GasPrototype
Unused as of yet, but laying the groundwork for future changes.
* Update AtmosphereMap, improving maths
Adds a temporary default atmosphere, hardcoded in for testing. It will
be replaced eventually.
Fixed a maths mistake in the original code involving unit conversions.
Added the Take() method to IAtmosphere, for taking some volume of
mixture out of a gas mix. This will be pretty handy in the future, but
for now it's used by walls to delete air where they are built.
* Fix merging, splitting logic for zones
Removing a cell from a zone now correctly reduces its volume.
Adding a cell to a zone now correctly increases its volume.
* Improvements to atmos code, reorganising of types
Moved GasPrototype to shared, because it's going to be used by the
client later.
Split up the atmosphere code. Now zones are explicitly their own kind of
atmosphere, which should speed up some loops and also solve
inconsistencies in the volume calculation.
GasMixtures are another type of atmosphere, for more general use.
Try to fix the splitting/merging code, which was quite cryptic and not
clear at all. It *should* work now.
* Switch zones back to MapIndices
Turns out I'm an idiot who misunderstood the code. MapIndices can be
used as one-per-tile, which is what is needed for atmos. GridCoordinates
are many-per-tile, and were causing lots of problems.
* Add zone debugging overlay
This is the first example of zone information being sent to a client.
It adds the `togglezoneinfo` command, which overlays the tiles and gas
information for the zone currently occupied by the user on the screen.
This was helpful for debugging the GridCoordinates problem.
* Fix position of atmos zone debug text
* Make AirtightComponent only activate on MapInit
This should stop it splitting atmospheres in mapping.
* Doc comments improvements to AtmosphereMap
Fix some malformed comments, inherit some useful docs, document some
more functions.
* Add zone logic for changing tiles to/from space
Zones are now correctly created when all the tiles in a room are built,
and destroyed when one of the tiles is destroyed.
* update engine
* right
* Cleanup code
* Port GasMixture, further cleanup
* Fix windows not being airtight, some other stuff
* Work on atmos
* Difference between ZoneBlocked and AirBlocked
* Big GridAtmosphereManager cleanup, zones are broken now oops
* Remove zones, add excited group implementation
* Further cleanup
* Further work on atmos
* Work on gas overlay.
* PumpGasTo and ReleaseGasTo methods for GasMixture.
* Adds Tile Overlay System.
* More work on atmos
* Gasses spread, equalize and all that
* Fix a few crashes
* Gas can actually spread from room to room after opening airlocks
* Add explosive depressurization, tile prying on depressurization, gas spreading on wall break. Etc.
* More work
* Remove atmoschem, add "performant" gas overlays
* what the fuck git
* More work I guess?
* Fix stuff, create a few (empty) components for future work
* Fix temperature
* Fix tile air sharing
* Atmos optimizations
* Further atmos optimizations
* Even more optimizations!
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Address a few reviews
* Oops, forgot to remove this
* Update Content.Server/Atmos/AtmosphereMap.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Fix compile
* Improved client gas tile overlays
* Less allocations
* Even less allocations!
* some stuff dunno
* Big refactor time, oh yeah
* it truly is 1 AM
* bruh
* No idea why now it doesn't work.
Oh well! I'll fix this on thursday :relieved:
* Basic atmos serialization
* Fix bugs, add VV attributes
* Start adding stuff for gas reactions
* Add a few atmos commands
* Fill gas command
* Changes to gas opacity
* Fixes I guess
* Fixes, add space wind sound
* High pressure movement!
* Better high pressure movements.
* Fix direction, maybe?
* And now it works great
* Science!
* and this is why you don't trust people
* remove logging
* Turns out I'm fucking dumb
* Work on hotspots and reactions, add tritium gas
* IGridAtmosphereComponent interface! For future unsimulated grids.
* Makes atmos updates NoGC.
* C E A S E
* Add settemp atmos command
* Important reminder.
* Remove useless AtmosCooldown.
* More work on hotspots
* Overlays for hotspots. Fire works!
* Turns out I suck at coding
* Fire texture change
* Yeah let's make that an absolute value, hmm?
* Support for atmos after teleporting grid (more or less)
* fix attempt (doesn't actually fix it)
* Make static variable not static
* Remove magic numbers
* Stopwatch moment
* Slight cleanup.
* More cleanup.
* Atmos optimizations
* Fix build
* Remove useless ghost atmos shit
* Adds CanSeeGases component for gas overlay stuff
* Component and prototype ignores
* ExcitedGroups now dispose on being merged with others
* Some tweaking.
* Atmos now uses frame time for updates.
* Nullable boogaloo
* IExamine fix
* Fix build
* Fix restartround
* Atmos tweaking, use invalid direction
* Increase high pressure movement force
* Better sort
* Update submodule.
* NULLABILITY AAAAH
Special thanks to monster860 and all monstermos contributors!
Co-authored-by: Campbell Suter <znix@znix.xyz>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
Co-authored-by: ComicIronic <comicironic@gmail.com>
Co-authored-by: silicons <2003111+silicons@users.noreply.github.com>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
2020-08-02 20:08:20 +02:00
|
|
|
|
{
|
2020-09-11 12:52:40 +02:00
|
|
|
|
// The arrays MUST have a specific length.
|
2021-06-23 11:35:30 +02:00
|
|
|
|
Array.Resize(ref Moles, Atmospherics.AdjustedNumberOfGases);
|
Adds atmos (#1389)
* Add initial atmospherics framework
* Make walls and airlocks airtight
* Add the basic atmosphere gas system
* Atmos: move CardinalToIntVec and Offset into extention methods in EntityNetworkUtils
* Optimize vending machine code a bit.
* Address feedback from Atmos PR, make code compile
Fix use of OnMove -> SnapGridComponent.OnPositionChanged.
Added pause checking to atmos simulations.
* Improvements to the existing ZAS prototype (#996)
* Rename Volume -> Quantity in GasProperty
This makes the name consistent with the rest of the code, given that
it's meant to be a mol value.
* Replace Gas enum with GasPrototype
Unused as of yet, but laying the groundwork for future changes.
* Update AtmosphereMap, improving maths
Adds a temporary default atmosphere, hardcoded in for testing. It will
be replaced eventually.
Fixed a maths mistake in the original code involving unit conversions.
Added the Take() method to IAtmosphere, for taking some volume of
mixture out of a gas mix. This will be pretty handy in the future, but
for now it's used by walls to delete air where they are built.
* Fix merging, splitting logic for zones
Removing a cell from a zone now correctly reduces its volume.
Adding a cell to a zone now correctly increases its volume.
* Improvements to atmos code, reorganising of types
Moved GasPrototype to shared, because it's going to be used by the
client later.
Split up the atmosphere code. Now zones are explicitly their own kind of
atmosphere, which should speed up some loops and also solve
inconsistencies in the volume calculation.
GasMixtures are another type of atmosphere, for more general use.
Try to fix the splitting/merging code, which was quite cryptic and not
clear at all. It *should* work now.
* Switch zones back to MapIndices
Turns out I'm an idiot who misunderstood the code. MapIndices can be
used as one-per-tile, which is what is needed for atmos. GridCoordinates
are many-per-tile, and were causing lots of problems.
* Add zone debugging overlay
This is the first example of zone information being sent to a client.
It adds the `togglezoneinfo` command, which overlays the tiles and gas
information for the zone currently occupied by the user on the screen.
This was helpful for debugging the GridCoordinates problem.
* Fix position of atmos zone debug text
* Make AirtightComponent only activate on MapInit
This should stop it splitting atmospheres in mapping.
* Doc comments improvements to AtmosphereMap
Fix some malformed comments, inherit some useful docs, document some
more functions.
* Add zone logic for changing tiles to/from space
Zones are now correctly created when all the tiles in a room are built,
and destroyed when one of the tiles is destroyed.
* update engine
* right
* Cleanup code
* Port GasMixture, further cleanup
* Fix windows not being airtight, some other stuff
* Work on atmos
* Difference between ZoneBlocked and AirBlocked
* Big GridAtmosphereManager cleanup, zones are broken now oops
* Remove zones, add excited group implementation
* Further cleanup
* Further work on atmos
* Work on gas overlay.
* PumpGasTo and ReleaseGasTo methods for GasMixture.
* Adds Tile Overlay System.
* More work on atmos
* Gasses spread, equalize and all that
* Fix a few crashes
* Gas can actually spread from room to room after opening airlocks
* Add explosive depressurization, tile prying on depressurization, gas spreading on wall break. Etc.
* More work
* Remove atmoschem, add "performant" gas overlays
* what the fuck git
* More work I guess?
* Fix stuff, create a few (empty) components for future work
* Fix temperature
* Fix tile air sharing
* Atmos optimizations
* Further atmos optimizations
* Even more optimizations!
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Address a few reviews
* Oops, forgot to remove this
* Update Content.Server/Atmos/AtmosphereMap.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Fix compile
* Improved client gas tile overlays
* Less allocations
* Even less allocations!
* some stuff dunno
* Big refactor time, oh yeah
* it truly is 1 AM
* bruh
* No idea why now it doesn't work.
Oh well! I'll fix this on thursday :relieved:
* Basic atmos serialization
* Fix bugs, add VV attributes
* Start adding stuff for gas reactions
* Add a few atmos commands
* Fill gas command
* Changes to gas opacity
* Fixes I guess
* Fixes, add space wind sound
* High pressure movement!
* Better high pressure movements.
* Fix direction, maybe?
* And now it works great
* Science!
* and this is why you don't trust people
* remove logging
* Turns out I'm fucking dumb
* Work on hotspots and reactions, add tritium gas
* IGridAtmosphereComponent interface! For future unsimulated grids.
* Makes atmos updates NoGC.
* C E A S E
* Add settemp atmos command
* Important reminder.
* Remove useless AtmosCooldown.
* More work on hotspots
* Overlays for hotspots. Fire works!
* Turns out I suck at coding
* Fire texture change
* Yeah let's make that an absolute value, hmm?
* Support for atmos after teleporting grid (more or less)
* fix attempt (doesn't actually fix it)
* Make static variable not static
* Remove magic numbers
* Stopwatch moment
* Slight cleanup.
* More cleanup.
* Atmos optimizations
* Fix build
* Remove useless ghost atmos shit
* Adds CanSeeGases component for gas overlay stuff
* Component and prototype ignores
* ExcitedGroups now dispose on being merged with others
* Some tweaking.
* Atmos now uses frame time for updates.
* Nullable boogaloo
* IExamine fix
* Fix build
* Fix restartround
* Atmos tweaking, use invalid direction
* Increase high pressure movement force
* Better sort
* Update submodule.
* NULLABILITY AAAAH
Special thanks to monster860 and all monstermos contributors!
Co-authored-by: Campbell Suter <znix@znix.xyz>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
Co-authored-by: ComicIronic <comicironic@gmail.com>
Co-authored-by: silicons <2003111+silicons@users.noreply.github.com>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
2020-08-02 20:08:20 +02:00
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
public override bool Equals(object? obj)
|
|
|
|
|
|
{
|
|
|
|
|
|
if (obj is GasMixture mix)
|
|
|
|
|
|
return Equals(mix);
|
|
|
|
|
|
return false;
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
public bool Equals(GasMixture? other)
|
|
|
|
|
|
{
|
|
|
|
|
|
if (ReferenceEquals(null, other)) return false;
|
|
|
|
|
|
if (ReferenceEquals(this, other)) return true;
|
2021-06-23 11:35:30 +02:00
|
|
|
|
return Moles.SequenceEqual(other.Moles)
|
Adds atmos (#1389)
* Add initial atmospherics framework
* Make walls and airlocks airtight
* Add the basic atmosphere gas system
* Atmos: move CardinalToIntVec and Offset into extention methods in EntityNetworkUtils
* Optimize vending machine code a bit.
* Address feedback from Atmos PR, make code compile
Fix use of OnMove -> SnapGridComponent.OnPositionChanged.
Added pause checking to atmos simulations.
* Improvements to the existing ZAS prototype (#996)
* Rename Volume -> Quantity in GasProperty
This makes the name consistent with the rest of the code, given that
it's meant to be a mol value.
* Replace Gas enum with GasPrototype
Unused as of yet, but laying the groundwork for future changes.
* Update AtmosphereMap, improving maths
Adds a temporary default atmosphere, hardcoded in for testing. It will
be replaced eventually.
Fixed a maths mistake in the original code involving unit conversions.
Added the Take() method to IAtmosphere, for taking some volume of
mixture out of a gas mix. This will be pretty handy in the future, but
for now it's used by walls to delete air where they are built.
* Fix merging, splitting logic for zones
Removing a cell from a zone now correctly reduces its volume.
Adding a cell to a zone now correctly increases its volume.
* Improvements to atmos code, reorganising of types
Moved GasPrototype to shared, because it's going to be used by the
client later.
Split up the atmosphere code. Now zones are explicitly their own kind of
atmosphere, which should speed up some loops and also solve
inconsistencies in the volume calculation.
GasMixtures are another type of atmosphere, for more general use.
Try to fix the splitting/merging code, which was quite cryptic and not
clear at all. It *should* work now.
* Switch zones back to MapIndices
Turns out I'm an idiot who misunderstood the code. MapIndices can be
used as one-per-tile, which is what is needed for atmos. GridCoordinates
are many-per-tile, and were causing lots of problems.
* Add zone debugging overlay
This is the first example of zone information being sent to a client.
It adds the `togglezoneinfo` command, which overlays the tiles and gas
information for the zone currently occupied by the user on the screen.
This was helpful for debugging the GridCoordinates problem.
* Fix position of atmos zone debug text
* Make AirtightComponent only activate on MapInit
This should stop it splitting atmospheres in mapping.
* Doc comments improvements to AtmosphereMap
Fix some malformed comments, inherit some useful docs, document some
more functions.
* Add zone logic for changing tiles to/from space
Zones are now correctly created when all the tiles in a room are built,
and destroyed when one of the tiles is destroyed.
* update engine
* right
* Cleanup code
* Port GasMixture, further cleanup
* Fix windows not being airtight, some other stuff
* Work on atmos
* Difference between ZoneBlocked and AirBlocked
* Big GridAtmosphereManager cleanup, zones are broken now oops
* Remove zones, add excited group implementation
* Further cleanup
* Further work on atmos
* Work on gas overlay.
* PumpGasTo and ReleaseGasTo methods for GasMixture.
* Adds Tile Overlay System.
* More work on atmos
* Gasses spread, equalize and all that
* Fix a few crashes
* Gas can actually spread from room to room after opening airlocks
* Add explosive depressurization, tile prying on depressurization, gas spreading on wall break. Etc.
* More work
* Remove atmoschem, add "performant" gas overlays
* what the fuck git
* More work I guess?
* Fix stuff, create a few (empty) components for future work
* Fix temperature
* Fix tile air sharing
* Atmos optimizations
* Further atmos optimizations
* Even more optimizations!
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Address a few reviews
* Oops, forgot to remove this
* Update Content.Server/Atmos/AtmosphereMap.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Fix compile
* Improved client gas tile overlays
* Less allocations
* Even less allocations!
* some stuff dunno
* Big refactor time, oh yeah
* it truly is 1 AM
* bruh
* No idea why now it doesn't work.
Oh well! I'll fix this on thursday :relieved:
* Basic atmos serialization
* Fix bugs, add VV attributes
* Start adding stuff for gas reactions
* Add a few atmos commands
* Fill gas command
* Changes to gas opacity
* Fixes I guess
* Fixes, add space wind sound
* High pressure movement!
* Better high pressure movements.
* Fix direction, maybe?
* And now it works great
* Science!
* and this is why you don't trust people
* remove logging
* Turns out I'm fucking dumb
* Work on hotspots and reactions, add tritium gas
* IGridAtmosphereComponent interface! For future unsimulated grids.
* Makes atmos updates NoGC.
* C E A S E
* Add settemp atmos command
* Important reminder.
* Remove useless AtmosCooldown.
* More work on hotspots
* Overlays for hotspots. Fire works!
* Turns out I suck at coding
* Fire texture change
* Yeah let's make that an absolute value, hmm?
* Support for atmos after teleporting grid (more or less)
* fix attempt (doesn't actually fix it)
* Make static variable not static
* Remove magic numbers
* Stopwatch moment
* Slight cleanup.
* More cleanup.
* Atmos optimizations
* Fix build
* Remove useless ghost atmos shit
* Adds CanSeeGases component for gas overlay stuff
* Component and prototype ignores
* ExcitedGroups now dispose on being merged with others
* Some tweaking.
* Atmos now uses frame time for updates.
* Nullable boogaloo
* IExamine fix
* Fix build
* Fix restartround
* Atmos tweaking, use invalid direction
* Increase high pressure movement force
* Better sort
* Update submodule.
* NULLABILITY AAAAH
Special thanks to monster860 and all monstermos contributors!
Co-authored-by: Campbell Suter <znix@znix.xyz>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
Co-authored-by: ComicIronic <comicironic@gmail.com>
Co-authored-by: silicons <2003111+silicons@users.noreply.github.com>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
2020-08-02 20:08:20 +02:00
|
|
|
|
&& _temperature.Equals(other._temperature)
|
2020-08-09 16:52:59 +02:00
|
|
|
|
&& ReactionResults.SequenceEqual(other.ReactionResults)
|
Adds atmos (#1389)
* Add initial atmospherics framework
* Make walls and airlocks airtight
* Add the basic atmosphere gas system
* Atmos: move CardinalToIntVec and Offset into extention methods in EntityNetworkUtils
* Optimize vending machine code a bit.
* Address feedback from Atmos PR, make code compile
Fix use of OnMove -> SnapGridComponent.OnPositionChanged.
Added pause checking to atmos simulations.
* Improvements to the existing ZAS prototype (#996)
* Rename Volume -> Quantity in GasProperty
This makes the name consistent with the rest of the code, given that
it's meant to be a mol value.
* Replace Gas enum with GasPrototype
Unused as of yet, but laying the groundwork for future changes.
* Update AtmosphereMap, improving maths
Adds a temporary default atmosphere, hardcoded in for testing. It will
be replaced eventually.
Fixed a maths mistake in the original code involving unit conversions.
Added the Take() method to IAtmosphere, for taking some volume of
mixture out of a gas mix. This will be pretty handy in the future, but
for now it's used by walls to delete air where they are built.
* Fix merging, splitting logic for zones
Removing a cell from a zone now correctly reduces its volume.
Adding a cell to a zone now correctly increases its volume.
* Improvements to atmos code, reorganising of types
Moved GasPrototype to shared, because it's going to be used by the
client later.
Split up the atmosphere code. Now zones are explicitly their own kind of
atmosphere, which should speed up some loops and also solve
inconsistencies in the volume calculation.
GasMixtures are another type of atmosphere, for more general use.
Try to fix the splitting/merging code, which was quite cryptic and not
clear at all. It *should* work now.
* Switch zones back to MapIndices
Turns out I'm an idiot who misunderstood the code. MapIndices can be
used as one-per-tile, which is what is needed for atmos. GridCoordinates
are many-per-tile, and were causing lots of problems.
* Add zone debugging overlay
This is the first example of zone information being sent to a client.
It adds the `togglezoneinfo` command, which overlays the tiles and gas
information for the zone currently occupied by the user on the screen.
This was helpful for debugging the GridCoordinates problem.
* Fix position of atmos zone debug text
* Make AirtightComponent only activate on MapInit
This should stop it splitting atmospheres in mapping.
* Doc comments improvements to AtmosphereMap
Fix some malformed comments, inherit some useful docs, document some
more functions.
* Add zone logic for changing tiles to/from space
Zones are now correctly created when all the tiles in a room are built,
and destroyed when one of the tiles is destroyed.
* update engine
* right
* Cleanup code
* Port GasMixture, further cleanup
* Fix windows not being airtight, some other stuff
* Work on atmos
* Difference between ZoneBlocked and AirBlocked
* Big GridAtmosphereManager cleanup, zones are broken now oops
* Remove zones, add excited group implementation
* Further cleanup
* Further work on atmos
* Work on gas overlay.
* PumpGasTo and ReleaseGasTo methods for GasMixture.
* Adds Tile Overlay System.
* More work on atmos
* Gasses spread, equalize and all that
* Fix a few crashes
* Gas can actually spread from room to room after opening airlocks
* Add explosive depressurization, tile prying on depressurization, gas spreading on wall break. Etc.
* More work
* Remove atmoschem, add "performant" gas overlays
* what the fuck git
* More work I guess?
* Fix stuff, create a few (empty) components for future work
* Fix temperature
* Fix tile air sharing
* Atmos optimizations
* Further atmos optimizations
* Even more optimizations!
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Address a few reviews
* Oops, forgot to remove this
* Update Content.Server/Atmos/AtmosphereMap.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Fix compile
* Improved client gas tile overlays
* Less allocations
* Even less allocations!
* some stuff dunno
* Big refactor time, oh yeah
* it truly is 1 AM
* bruh
* No idea why now it doesn't work.
Oh well! I'll fix this on thursday :relieved:
* Basic atmos serialization
* Fix bugs, add VV attributes
* Start adding stuff for gas reactions
* Add a few atmos commands
* Fill gas command
* Changes to gas opacity
* Fixes I guess
* Fixes, add space wind sound
* High pressure movement!
* Better high pressure movements.
* Fix direction, maybe?
* And now it works great
* Science!
* and this is why you don't trust people
* remove logging
* Turns out I'm fucking dumb
* Work on hotspots and reactions, add tritium gas
* IGridAtmosphereComponent interface! For future unsimulated grids.
* Makes atmos updates NoGC.
* C E A S E
* Add settemp atmos command
* Important reminder.
* Remove useless AtmosCooldown.
* More work on hotspots
* Overlays for hotspots. Fire works!
* Turns out I suck at coding
* Fire texture change
* Yeah let's make that an absolute value, hmm?
* Support for atmos after teleporting grid (more or less)
* fix attempt (doesn't actually fix it)
* Make static variable not static
* Remove magic numbers
* Stopwatch moment
* Slight cleanup.
* More cleanup.
* Atmos optimizations
* Fix build
* Remove useless ghost atmos shit
* Adds CanSeeGases component for gas overlay stuff
* Component and prototype ignores
* ExcitedGroups now dispose on being merged with others
* Some tweaking.
* Atmos now uses frame time for updates.
* Nullable boogaloo
* IExamine fix
* Fix build
* Fix restartround
* Atmos tweaking, use invalid direction
* Increase high pressure movement force
* Better sort
* Update submodule.
* NULLABILITY AAAAH
Special thanks to monster860 and all monstermos contributors!
Co-authored-by: Campbell Suter <znix@znix.xyz>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
Co-authored-by: ComicIronic <comicironic@gmail.com>
Co-authored-by: silicons <2003111+silicons@users.noreply.github.com>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
2020-08-02 20:08:20 +02:00
|
|
|
|
&& Immutable == other.Immutable
|
|
|
|
|
|
&& Volume.Equals(other.Volume);
|
|
|
|
|
|
}
|
|
|
|
|
|
|
2022-07-04 16:51:34 +02:00
|
|
|
|
[SuppressMessage("ReSharper", "NonReadonlyMemberInGetHashCode")]
|
Adds atmos (#1389)
* Add initial atmospherics framework
* Make walls and airlocks airtight
* Add the basic atmosphere gas system
* Atmos: move CardinalToIntVec and Offset into extention methods in EntityNetworkUtils
* Optimize vending machine code a bit.
* Address feedback from Atmos PR, make code compile
Fix use of OnMove -> SnapGridComponent.OnPositionChanged.
Added pause checking to atmos simulations.
* Improvements to the existing ZAS prototype (#996)
* Rename Volume -> Quantity in GasProperty
This makes the name consistent with the rest of the code, given that
it's meant to be a mol value.
* Replace Gas enum with GasPrototype
Unused as of yet, but laying the groundwork for future changes.
* Update AtmosphereMap, improving maths
Adds a temporary default atmosphere, hardcoded in for testing. It will
be replaced eventually.
Fixed a maths mistake in the original code involving unit conversions.
Added the Take() method to IAtmosphere, for taking some volume of
mixture out of a gas mix. This will be pretty handy in the future, but
for now it's used by walls to delete air where they are built.
* Fix merging, splitting logic for zones
Removing a cell from a zone now correctly reduces its volume.
Adding a cell to a zone now correctly increases its volume.
* Improvements to atmos code, reorganising of types
Moved GasPrototype to shared, because it's going to be used by the
client later.
Split up the atmosphere code. Now zones are explicitly their own kind of
atmosphere, which should speed up some loops and also solve
inconsistencies in the volume calculation.
GasMixtures are another type of atmosphere, for more general use.
Try to fix the splitting/merging code, which was quite cryptic and not
clear at all. It *should* work now.
* Switch zones back to MapIndices
Turns out I'm an idiot who misunderstood the code. MapIndices can be
used as one-per-tile, which is what is needed for atmos. GridCoordinates
are many-per-tile, and were causing lots of problems.
* Add zone debugging overlay
This is the first example of zone information being sent to a client.
It adds the `togglezoneinfo` command, which overlays the tiles and gas
information for the zone currently occupied by the user on the screen.
This was helpful for debugging the GridCoordinates problem.
* Fix position of atmos zone debug text
* Make AirtightComponent only activate on MapInit
This should stop it splitting atmospheres in mapping.
* Doc comments improvements to AtmosphereMap
Fix some malformed comments, inherit some useful docs, document some
more functions.
* Add zone logic for changing tiles to/from space
Zones are now correctly created when all the tiles in a room are built,
and destroyed when one of the tiles is destroyed.
* update engine
* right
* Cleanup code
* Port GasMixture, further cleanup
* Fix windows not being airtight, some other stuff
* Work on atmos
* Difference between ZoneBlocked and AirBlocked
* Big GridAtmosphereManager cleanup, zones are broken now oops
* Remove zones, add excited group implementation
* Further cleanup
* Further work on atmos
* Work on gas overlay.
* PumpGasTo and ReleaseGasTo methods for GasMixture.
* Adds Tile Overlay System.
* More work on atmos
* Gasses spread, equalize and all that
* Fix a few crashes
* Gas can actually spread from room to room after opening airlocks
* Add explosive depressurization, tile prying on depressurization, gas spreading on wall break. Etc.
* More work
* Remove atmoschem, add "performant" gas overlays
* what the fuck git
* More work I guess?
* Fix stuff, create a few (empty) components for future work
* Fix temperature
* Fix tile air sharing
* Atmos optimizations
* Further atmos optimizations
* Even more optimizations!
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Address a few reviews
* Oops, forgot to remove this
* Update Content.Server/Atmos/AtmosphereMap.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Fix compile
* Improved client gas tile overlays
* Less allocations
* Even less allocations!
* some stuff dunno
* Big refactor time, oh yeah
* it truly is 1 AM
* bruh
* No idea why now it doesn't work.
Oh well! I'll fix this on thursday :relieved:
* Basic atmos serialization
* Fix bugs, add VV attributes
* Start adding stuff for gas reactions
* Add a few atmos commands
* Fill gas command
* Changes to gas opacity
* Fixes I guess
* Fixes, add space wind sound
* High pressure movement!
* Better high pressure movements.
* Fix direction, maybe?
* And now it works great
* Science!
* and this is why you don't trust people
* remove logging
* Turns out I'm fucking dumb
* Work on hotspots and reactions, add tritium gas
* IGridAtmosphereComponent interface! For future unsimulated grids.
* Makes atmos updates NoGC.
* C E A S E
* Add settemp atmos command
* Important reminder.
* Remove useless AtmosCooldown.
* More work on hotspots
* Overlays for hotspots. Fire works!
* Turns out I suck at coding
* Fire texture change
* Yeah let's make that an absolute value, hmm?
* Support for atmos after teleporting grid (more or less)
* fix attempt (doesn't actually fix it)
* Make static variable not static
* Remove magic numbers
* Stopwatch moment
* Slight cleanup.
* More cleanup.
* Atmos optimizations
* Fix build
* Remove useless ghost atmos shit
* Adds CanSeeGases component for gas overlay stuff
* Component and prototype ignores
* ExcitedGroups now dispose on being merged with others
* Some tweaking.
* Atmos now uses frame time for updates.
* Nullable boogaloo
* IExamine fix
* Fix build
* Fix restartround
* Atmos tweaking, use invalid direction
* Increase high pressure movement force
* Better sort
* Update submodule.
* NULLABILITY AAAAH
Special thanks to monster860 and all monstermos contributors!
Co-authored-by: Campbell Suter <znix@znix.xyz>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
Co-authored-by: ComicIronic <comicironic@gmail.com>
Co-authored-by: silicons <2003111+silicons@users.noreply.github.com>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
2020-08-02 20:08:20 +02:00
|
|
|
|
public override int GetHashCode()
|
|
|
|
|
|
{
|
2020-08-09 16:52:59 +02:00
|
|
|
|
var hashCode = new HashCode();
|
|
|
|
|
|
|
|
|
|
|
|
for (var i = 0; i < Atmospherics.TotalNumberOfGases; i++)
|
|
|
|
|
|
{
|
2021-06-23 11:35:30 +02:00
|
|
|
|
var moles = Moles[i];
|
2020-08-09 16:52:59 +02:00
|
|
|
|
hashCode.Add(moles);
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
hashCode.Add(_temperature);
|
|
|
|
|
|
hashCode.Add(Immutable);
|
|
|
|
|
|
hashCode.Add(Volume);
|
|
|
|
|
|
|
|
|
|
|
|
return hashCode.ToHashCode();
|
Adds atmos (#1389)
* Add initial atmospherics framework
* Make walls and airlocks airtight
* Add the basic atmosphere gas system
* Atmos: move CardinalToIntVec and Offset into extention methods in EntityNetworkUtils
* Optimize vending machine code a bit.
* Address feedback from Atmos PR, make code compile
Fix use of OnMove -> SnapGridComponent.OnPositionChanged.
Added pause checking to atmos simulations.
* Improvements to the existing ZAS prototype (#996)
* Rename Volume -> Quantity in GasProperty
This makes the name consistent with the rest of the code, given that
it's meant to be a mol value.
* Replace Gas enum with GasPrototype
Unused as of yet, but laying the groundwork for future changes.
* Update AtmosphereMap, improving maths
Adds a temporary default atmosphere, hardcoded in for testing. It will
be replaced eventually.
Fixed a maths mistake in the original code involving unit conversions.
Added the Take() method to IAtmosphere, for taking some volume of
mixture out of a gas mix. This will be pretty handy in the future, but
for now it's used by walls to delete air where they are built.
* Fix merging, splitting logic for zones
Removing a cell from a zone now correctly reduces its volume.
Adding a cell to a zone now correctly increases its volume.
* Improvements to atmos code, reorganising of types
Moved GasPrototype to shared, because it's going to be used by the
client later.
Split up the atmosphere code. Now zones are explicitly their own kind of
atmosphere, which should speed up some loops and also solve
inconsistencies in the volume calculation.
GasMixtures are another type of atmosphere, for more general use.
Try to fix the splitting/merging code, which was quite cryptic and not
clear at all. It *should* work now.
* Switch zones back to MapIndices
Turns out I'm an idiot who misunderstood the code. MapIndices can be
used as one-per-tile, which is what is needed for atmos. GridCoordinates
are many-per-tile, and were causing lots of problems.
* Add zone debugging overlay
This is the first example of zone information being sent to a client.
It adds the `togglezoneinfo` command, which overlays the tiles and gas
information for the zone currently occupied by the user on the screen.
This was helpful for debugging the GridCoordinates problem.
* Fix position of atmos zone debug text
* Make AirtightComponent only activate on MapInit
This should stop it splitting atmospheres in mapping.
* Doc comments improvements to AtmosphereMap
Fix some malformed comments, inherit some useful docs, document some
more functions.
* Add zone logic for changing tiles to/from space
Zones are now correctly created when all the tiles in a room are built,
and destroyed when one of the tiles is destroyed.
* update engine
* right
* Cleanup code
* Port GasMixture, further cleanup
* Fix windows not being airtight, some other stuff
* Work on atmos
* Difference between ZoneBlocked and AirBlocked
* Big GridAtmosphereManager cleanup, zones are broken now oops
* Remove zones, add excited group implementation
* Further cleanup
* Further work on atmos
* Work on gas overlay.
* PumpGasTo and ReleaseGasTo methods for GasMixture.
* Adds Tile Overlay System.
* More work on atmos
* Gasses spread, equalize and all that
* Fix a few crashes
* Gas can actually spread from room to room after opening airlocks
* Add explosive depressurization, tile prying on depressurization, gas spreading on wall break. Etc.
* More work
* Remove atmoschem, add "performant" gas overlays
* what the fuck git
* More work I guess?
* Fix stuff, create a few (empty) components for future work
* Fix temperature
* Fix tile air sharing
* Atmos optimizations
* Further atmos optimizations
* Even more optimizations!
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Address a few reviews
* Oops, forgot to remove this
* Update Content.Server/Atmos/AtmosphereMap.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Fix compile
* Improved client gas tile overlays
* Less allocations
* Even less allocations!
* some stuff dunno
* Big refactor time, oh yeah
* it truly is 1 AM
* bruh
* No idea why now it doesn't work.
Oh well! I'll fix this on thursday :relieved:
* Basic atmos serialization
* Fix bugs, add VV attributes
* Start adding stuff for gas reactions
* Add a few atmos commands
* Fill gas command
* Changes to gas opacity
* Fixes I guess
* Fixes, add space wind sound
* High pressure movement!
* Better high pressure movements.
* Fix direction, maybe?
* And now it works great
* Science!
* and this is why you don't trust people
* remove logging
* Turns out I'm fucking dumb
* Work on hotspots and reactions, add tritium gas
* IGridAtmosphereComponent interface! For future unsimulated grids.
* Makes atmos updates NoGC.
* C E A S E
* Add settemp atmos command
* Important reminder.
* Remove useless AtmosCooldown.
* More work on hotspots
* Overlays for hotspots. Fire works!
* Turns out I suck at coding
* Fire texture change
* Yeah let's make that an absolute value, hmm?
* Support for atmos after teleporting grid (more or less)
* fix attempt (doesn't actually fix it)
* Make static variable not static
* Remove magic numbers
* Stopwatch moment
* Slight cleanup.
* More cleanup.
* Atmos optimizations
* Fix build
* Remove useless ghost atmos shit
* Adds CanSeeGases component for gas overlay stuff
* Component and prototype ignores
* ExcitedGroups now dispose on being merged with others
* Some tweaking.
* Atmos now uses frame time for updates.
* Nullable boogaloo
* IExamine fix
* Fix build
* Fix restartround
* Atmos tweaking, use invalid direction
* Increase high pressure movement force
* Better sort
* Update submodule.
* NULLABILITY AAAAH
Special thanks to monster860 and all monstermos contributors!
Co-authored-by: Campbell Suter <znix@znix.xyz>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
Co-authored-by: ComicIronic <comicironic@gmail.com>
Co-authored-by: silicons <2003111+silicons@users.noreply.github.com>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
2020-08-02 20:08:20 +02:00
|
|
|
|
}
|
|
|
|
|
|
|
2022-04-24 13:54:25 +10:00
|
|
|
|
public GasMixture Clone()
|
Adds atmos (#1389)
* Add initial atmospherics framework
* Make walls and airlocks airtight
* Add the basic atmosphere gas system
* Atmos: move CardinalToIntVec and Offset into extention methods in EntityNetworkUtils
* Optimize vending machine code a bit.
* Address feedback from Atmos PR, make code compile
Fix use of OnMove -> SnapGridComponent.OnPositionChanged.
Added pause checking to atmos simulations.
* Improvements to the existing ZAS prototype (#996)
* Rename Volume -> Quantity in GasProperty
This makes the name consistent with the rest of the code, given that
it's meant to be a mol value.
* Replace Gas enum with GasPrototype
Unused as of yet, but laying the groundwork for future changes.
* Update AtmosphereMap, improving maths
Adds a temporary default atmosphere, hardcoded in for testing. It will
be replaced eventually.
Fixed a maths mistake in the original code involving unit conversions.
Added the Take() method to IAtmosphere, for taking some volume of
mixture out of a gas mix. This will be pretty handy in the future, but
for now it's used by walls to delete air where they are built.
* Fix merging, splitting logic for zones
Removing a cell from a zone now correctly reduces its volume.
Adding a cell to a zone now correctly increases its volume.
* Improvements to atmos code, reorganising of types
Moved GasPrototype to shared, because it's going to be used by the
client later.
Split up the atmosphere code. Now zones are explicitly their own kind of
atmosphere, which should speed up some loops and also solve
inconsistencies in the volume calculation.
GasMixtures are another type of atmosphere, for more general use.
Try to fix the splitting/merging code, which was quite cryptic and not
clear at all. It *should* work now.
* Switch zones back to MapIndices
Turns out I'm an idiot who misunderstood the code. MapIndices can be
used as one-per-tile, which is what is needed for atmos. GridCoordinates
are many-per-tile, and were causing lots of problems.
* Add zone debugging overlay
This is the first example of zone information being sent to a client.
It adds the `togglezoneinfo` command, which overlays the tiles and gas
information for the zone currently occupied by the user on the screen.
This was helpful for debugging the GridCoordinates problem.
* Fix position of atmos zone debug text
* Make AirtightComponent only activate on MapInit
This should stop it splitting atmospheres in mapping.
* Doc comments improvements to AtmosphereMap
Fix some malformed comments, inherit some useful docs, document some
more functions.
* Add zone logic for changing tiles to/from space
Zones are now correctly created when all the tiles in a room are built,
and destroyed when one of the tiles is destroyed.
* update engine
* right
* Cleanup code
* Port GasMixture, further cleanup
* Fix windows not being airtight, some other stuff
* Work on atmos
* Difference between ZoneBlocked and AirBlocked
* Big GridAtmosphereManager cleanup, zones are broken now oops
* Remove zones, add excited group implementation
* Further cleanup
* Further work on atmos
* Work on gas overlay.
* PumpGasTo and ReleaseGasTo methods for GasMixture.
* Adds Tile Overlay System.
* More work on atmos
* Gasses spread, equalize and all that
* Fix a few crashes
* Gas can actually spread from room to room after opening airlocks
* Add explosive depressurization, tile prying on depressurization, gas spreading on wall break. Etc.
* More work
* Remove atmoschem, add "performant" gas overlays
* what the fuck git
* More work I guess?
* Fix stuff, create a few (empty) components for future work
* Fix temperature
* Fix tile air sharing
* Atmos optimizations
* Further atmos optimizations
* Even more optimizations!
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Address a few reviews
* Oops, forgot to remove this
* Update Content.Server/Atmos/AtmosphereMap.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Fix compile
* Improved client gas tile overlays
* Less allocations
* Even less allocations!
* some stuff dunno
* Big refactor time, oh yeah
* it truly is 1 AM
* bruh
* No idea why now it doesn't work.
Oh well! I'll fix this on thursday :relieved:
* Basic atmos serialization
* Fix bugs, add VV attributes
* Start adding stuff for gas reactions
* Add a few atmos commands
* Fill gas command
* Changes to gas opacity
* Fixes I guess
* Fixes, add space wind sound
* High pressure movement!
* Better high pressure movements.
* Fix direction, maybe?
* And now it works great
* Science!
* and this is why you don't trust people
* remove logging
* Turns out I'm fucking dumb
* Work on hotspots and reactions, add tritium gas
* IGridAtmosphereComponent interface! For future unsimulated grids.
* Makes atmos updates NoGC.
* C E A S E
* Add settemp atmos command
* Important reminder.
* Remove useless AtmosCooldown.
* More work on hotspots
* Overlays for hotspots. Fire works!
* Turns out I suck at coding
* Fire texture change
* Yeah let's make that an absolute value, hmm?
* Support for atmos after teleporting grid (more or less)
* fix attempt (doesn't actually fix it)
* Make static variable not static
* Remove magic numbers
* Stopwatch moment
* Slight cleanup.
* More cleanup.
* Atmos optimizations
* Fix build
* Remove useless ghost atmos shit
* Adds CanSeeGases component for gas overlay stuff
* Component and prototype ignores
* ExcitedGroups now dispose on being merged with others
* Some tweaking.
* Atmos now uses frame time for updates.
* Nullable boogaloo
* IExamine fix
* Fix build
* Fix restartround
* Atmos tweaking, use invalid direction
* Increase high pressure movement force
* Better sort
* Update submodule.
* NULLABILITY AAAAH
Special thanks to monster860 and all monstermos contributors!
Co-authored-by: Campbell Suter <znix@znix.xyz>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
Co-authored-by: ComicIronic <comicironic@gmail.com>
Co-authored-by: silicons <2003111+silicons@users.noreply.github.com>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
2020-08-02 20:08:20 +02:00
|
|
|
|
{
|
2021-06-23 11:35:30 +02:00
|
|
|
|
var newMixture = new GasMixture()
|
Adds atmos (#1389)
* Add initial atmospherics framework
* Make walls and airlocks airtight
* Add the basic atmosphere gas system
* Atmos: move CardinalToIntVec and Offset into extention methods in EntityNetworkUtils
* Optimize vending machine code a bit.
* Address feedback from Atmos PR, make code compile
Fix use of OnMove -> SnapGridComponent.OnPositionChanged.
Added pause checking to atmos simulations.
* Improvements to the existing ZAS prototype (#996)
* Rename Volume -> Quantity in GasProperty
This makes the name consistent with the rest of the code, given that
it's meant to be a mol value.
* Replace Gas enum with GasPrototype
Unused as of yet, but laying the groundwork for future changes.
* Update AtmosphereMap, improving maths
Adds a temporary default atmosphere, hardcoded in for testing. It will
be replaced eventually.
Fixed a maths mistake in the original code involving unit conversions.
Added the Take() method to IAtmosphere, for taking some volume of
mixture out of a gas mix. This will be pretty handy in the future, but
for now it's used by walls to delete air where they are built.
* Fix merging, splitting logic for zones
Removing a cell from a zone now correctly reduces its volume.
Adding a cell to a zone now correctly increases its volume.
* Improvements to atmos code, reorganising of types
Moved GasPrototype to shared, because it's going to be used by the
client later.
Split up the atmosphere code. Now zones are explicitly their own kind of
atmosphere, which should speed up some loops and also solve
inconsistencies in the volume calculation.
GasMixtures are another type of atmosphere, for more general use.
Try to fix the splitting/merging code, which was quite cryptic and not
clear at all. It *should* work now.
* Switch zones back to MapIndices
Turns out I'm an idiot who misunderstood the code. MapIndices can be
used as one-per-tile, which is what is needed for atmos. GridCoordinates
are many-per-tile, and were causing lots of problems.
* Add zone debugging overlay
This is the first example of zone information being sent to a client.
It adds the `togglezoneinfo` command, which overlays the tiles and gas
information for the zone currently occupied by the user on the screen.
This was helpful for debugging the GridCoordinates problem.
* Fix position of atmos zone debug text
* Make AirtightComponent only activate on MapInit
This should stop it splitting atmospheres in mapping.
* Doc comments improvements to AtmosphereMap
Fix some malformed comments, inherit some useful docs, document some
more functions.
* Add zone logic for changing tiles to/from space
Zones are now correctly created when all the tiles in a room are built,
and destroyed when one of the tiles is destroyed.
* update engine
* right
* Cleanup code
* Port GasMixture, further cleanup
* Fix windows not being airtight, some other stuff
* Work on atmos
* Difference between ZoneBlocked and AirBlocked
* Big GridAtmosphereManager cleanup, zones are broken now oops
* Remove zones, add excited group implementation
* Further cleanup
* Further work on atmos
* Work on gas overlay.
* PumpGasTo and ReleaseGasTo methods for GasMixture.
* Adds Tile Overlay System.
* More work on atmos
* Gasses spread, equalize and all that
* Fix a few crashes
* Gas can actually spread from room to room after opening airlocks
* Add explosive depressurization, tile prying on depressurization, gas spreading on wall break. Etc.
* More work
* Remove atmoschem, add "performant" gas overlays
* what the fuck git
* More work I guess?
* Fix stuff, create a few (empty) components for future work
* Fix temperature
* Fix tile air sharing
* Atmos optimizations
* Further atmos optimizations
* Even more optimizations!
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Address a few reviews
* Oops, forgot to remove this
* Update Content.Server/Atmos/AtmosphereMap.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Fix compile
* Improved client gas tile overlays
* Less allocations
* Even less allocations!
* some stuff dunno
* Big refactor time, oh yeah
* it truly is 1 AM
* bruh
* No idea why now it doesn't work.
Oh well! I'll fix this on thursday :relieved:
* Basic atmos serialization
* Fix bugs, add VV attributes
* Start adding stuff for gas reactions
* Add a few atmos commands
* Fill gas command
* Changes to gas opacity
* Fixes I guess
* Fixes, add space wind sound
* High pressure movement!
* Better high pressure movements.
* Fix direction, maybe?
* And now it works great
* Science!
* and this is why you don't trust people
* remove logging
* Turns out I'm fucking dumb
* Work on hotspots and reactions, add tritium gas
* IGridAtmosphereComponent interface! For future unsimulated grids.
* Makes atmos updates NoGC.
* C E A S E
* Add settemp atmos command
* Important reminder.
* Remove useless AtmosCooldown.
* More work on hotspots
* Overlays for hotspots. Fire works!
* Turns out I suck at coding
* Fire texture change
* Yeah let's make that an absolute value, hmm?
* Support for atmos after teleporting grid (more or less)
* fix attempt (doesn't actually fix it)
* Make static variable not static
* Remove magic numbers
* Stopwatch moment
* Slight cleanup.
* More cleanup.
* Atmos optimizations
* Fix build
* Remove useless ghost atmos shit
* Adds CanSeeGases component for gas overlay stuff
* Component and prototype ignores
* ExcitedGroups now dispose on being merged with others
* Some tweaking.
* Atmos now uses frame time for updates.
* Nullable boogaloo
* IExamine fix
* Fix build
* Fix restartround
* Atmos tweaking, use invalid direction
* Increase high pressure movement force
* Better sort
* Update submodule.
* NULLABILITY AAAAH
Special thanks to monster860 and all monstermos contributors!
Co-authored-by: Campbell Suter <znix@znix.xyz>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
Co-authored-by: ComicIronic <comicironic@gmail.com>
Co-authored-by: silicons <2003111+silicons@users.noreply.github.com>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
2020-08-02 20:08:20 +02:00
|
|
|
|
{
|
2021-06-23 11:35:30 +02:00
|
|
|
|
Moles = (float[])Moles.Clone(),
|
Adds atmos (#1389)
* Add initial atmospherics framework
* Make walls and airlocks airtight
* Add the basic atmosphere gas system
* Atmos: move CardinalToIntVec and Offset into extention methods in EntityNetworkUtils
* Optimize vending machine code a bit.
* Address feedback from Atmos PR, make code compile
Fix use of OnMove -> SnapGridComponent.OnPositionChanged.
Added pause checking to atmos simulations.
* Improvements to the existing ZAS prototype (#996)
* Rename Volume -> Quantity in GasProperty
This makes the name consistent with the rest of the code, given that
it's meant to be a mol value.
* Replace Gas enum with GasPrototype
Unused as of yet, but laying the groundwork for future changes.
* Update AtmosphereMap, improving maths
Adds a temporary default atmosphere, hardcoded in for testing. It will
be replaced eventually.
Fixed a maths mistake in the original code involving unit conversions.
Added the Take() method to IAtmosphere, for taking some volume of
mixture out of a gas mix. This will be pretty handy in the future, but
for now it's used by walls to delete air where they are built.
* Fix merging, splitting logic for zones
Removing a cell from a zone now correctly reduces its volume.
Adding a cell to a zone now correctly increases its volume.
* Improvements to atmos code, reorganising of types
Moved GasPrototype to shared, because it's going to be used by the
client later.
Split up the atmosphere code. Now zones are explicitly their own kind of
atmosphere, which should speed up some loops and also solve
inconsistencies in the volume calculation.
GasMixtures are another type of atmosphere, for more general use.
Try to fix the splitting/merging code, which was quite cryptic and not
clear at all. It *should* work now.
* Switch zones back to MapIndices
Turns out I'm an idiot who misunderstood the code. MapIndices can be
used as one-per-tile, which is what is needed for atmos. GridCoordinates
are many-per-tile, and were causing lots of problems.
* Add zone debugging overlay
This is the first example of zone information being sent to a client.
It adds the `togglezoneinfo` command, which overlays the tiles and gas
information for the zone currently occupied by the user on the screen.
This was helpful for debugging the GridCoordinates problem.
* Fix position of atmos zone debug text
* Make AirtightComponent only activate on MapInit
This should stop it splitting atmospheres in mapping.
* Doc comments improvements to AtmosphereMap
Fix some malformed comments, inherit some useful docs, document some
more functions.
* Add zone logic for changing tiles to/from space
Zones are now correctly created when all the tiles in a room are built,
and destroyed when one of the tiles is destroyed.
* update engine
* right
* Cleanup code
* Port GasMixture, further cleanup
* Fix windows not being airtight, some other stuff
* Work on atmos
* Difference between ZoneBlocked and AirBlocked
* Big GridAtmosphereManager cleanup, zones are broken now oops
* Remove zones, add excited group implementation
* Further cleanup
* Further work on atmos
* Work on gas overlay.
* PumpGasTo and ReleaseGasTo methods for GasMixture.
* Adds Tile Overlay System.
* More work on atmos
* Gasses spread, equalize and all that
* Fix a few crashes
* Gas can actually spread from room to room after opening airlocks
* Add explosive depressurization, tile prying on depressurization, gas spreading on wall break. Etc.
* More work
* Remove atmoschem, add "performant" gas overlays
* what the fuck git
* More work I guess?
* Fix stuff, create a few (empty) components for future work
* Fix temperature
* Fix tile air sharing
* Atmos optimizations
* Further atmos optimizations
* Even more optimizations!
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Address a few reviews
* Oops, forgot to remove this
* Update Content.Server/Atmos/AtmosphereMap.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Fix compile
* Improved client gas tile overlays
* Less allocations
* Even less allocations!
* some stuff dunno
* Big refactor time, oh yeah
* it truly is 1 AM
* bruh
* No idea why now it doesn't work.
Oh well! I'll fix this on thursday :relieved:
* Basic atmos serialization
* Fix bugs, add VV attributes
* Start adding stuff for gas reactions
* Add a few atmos commands
* Fill gas command
* Changes to gas opacity
* Fixes I guess
* Fixes, add space wind sound
* High pressure movement!
* Better high pressure movements.
* Fix direction, maybe?
* And now it works great
* Science!
* and this is why you don't trust people
* remove logging
* Turns out I'm fucking dumb
* Work on hotspots and reactions, add tritium gas
* IGridAtmosphereComponent interface! For future unsimulated grids.
* Makes atmos updates NoGC.
* C E A S E
* Add settemp atmos command
* Important reminder.
* Remove useless AtmosCooldown.
* More work on hotspots
* Overlays for hotspots. Fire works!
* Turns out I suck at coding
* Fire texture change
* Yeah let's make that an absolute value, hmm?
* Support for atmos after teleporting grid (more or less)
* fix attempt (doesn't actually fix it)
* Make static variable not static
* Remove magic numbers
* Stopwatch moment
* Slight cleanup.
* More cleanup.
* Atmos optimizations
* Fix build
* Remove useless ghost atmos shit
* Adds CanSeeGases component for gas overlay stuff
* Component and prototype ignores
* ExcitedGroups now dispose on being merged with others
* Some tweaking.
* Atmos now uses frame time for updates.
* Nullable boogaloo
* IExamine fix
* Fix build
* Fix restartround
* Atmos tweaking, use invalid direction
* Increase high pressure movement force
* Better sort
* Update submodule.
* NULLABILITY AAAAH
Special thanks to monster860 and all monstermos contributors!
Co-authored-by: Campbell Suter <znix@znix.xyz>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
Co-authored-by: ComicIronic <comicironic@gmail.com>
Co-authored-by: silicons <2003111+silicons@users.noreply.github.com>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
2020-08-02 20:08:20 +02:00
|
|
|
|
_temperature = _temperature,
|
|
|
|
|
|
Immutable = Immutable,
|
|
|
|
|
|
Volume = Volume,
|
|
|
|
|
|
};
|
2020-08-09 16:52:59 +02:00
|
|
|
|
return newMixture;
|
Adds atmos (#1389)
* Add initial atmospherics framework
* Make walls and airlocks airtight
* Add the basic atmosphere gas system
* Atmos: move CardinalToIntVec and Offset into extention methods in EntityNetworkUtils
* Optimize vending machine code a bit.
* Address feedback from Atmos PR, make code compile
Fix use of OnMove -> SnapGridComponent.OnPositionChanged.
Added pause checking to atmos simulations.
* Improvements to the existing ZAS prototype (#996)
* Rename Volume -> Quantity in GasProperty
This makes the name consistent with the rest of the code, given that
it's meant to be a mol value.
* Replace Gas enum with GasPrototype
Unused as of yet, but laying the groundwork for future changes.
* Update AtmosphereMap, improving maths
Adds a temporary default atmosphere, hardcoded in for testing. It will
be replaced eventually.
Fixed a maths mistake in the original code involving unit conversions.
Added the Take() method to IAtmosphere, for taking some volume of
mixture out of a gas mix. This will be pretty handy in the future, but
for now it's used by walls to delete air where they are built.
* Fix merging, splitting logic for zones
Removing a cell from a zone now correctly reduces its volume.
Adding a cell to a zone now correctly increases its volume.
* Improvements to atmos code, reorganising of types
Moved GasPrototype to shared, because it's going to be used by the
client later.
Split up the atmosphere code. Now zones are explicitly their own kind of
atmosphere, which should speed up some loops and also solve
inconsistencies in the volume calculation.
GasMixtures are another type of atmosphere, for more general use.
Try to fix the splitting/merging code, which was quite cryptic and not
clear at all. It *should* work now.
* Switch zones back to MapIndices
Turns out I'm an idiot who misunderstood the code. MapIndices can be
used as one-per-tile, which is what is needed for atmos. GridCoordinates
are many-per-tile, and were causing lots of problems.
* Add zone debugging overlay
This is the first example of zone information being sent to a client.
It adds the `togglezoneinfo` command, which overlays the tiles and gas
information for the zone currently occupied by the user on the screen.
This was helpful for debugging the GridCoordinates problem.
* Fix position of atmos zone debug text
* Make AirtightComponent only activate on MapInit
This should stop it splitting atmospheres in mapping.
* Doc comments improvements to AtmosphereMap
Fix some malformed comments, inherit some useful docs, document some
more functions.
* Add zone logic for changing tiles to/from space
Zones are now correctly created when all the tiles in a room are built,
and destroyed when one of the tiles is destroyed.
* update engine
* right
* Cleanup code
* Port GasMixture, further cleanup
* Fix windows not being airtight, some other stuff
* Work on atmos
* Difference between ZoneBlocked and AirBlocked
* Big GridAtmosphereManager cleanup, zones are broken now oops
* Remove zones, add excited group implementation
* Further cleanup
* Further work on atmos
* Work on gas overlay.
* PumpGasTo and ReleaseGasTo methods for GasMixture.
* Adds Tile Overlay System.
* More work on atmos
* Gasses spread, equalize and all that
* Fix a few crashes
* Gas can actually spread from room to room after opening airlocks
* Add explosive depressurization, tile prying on depressurization, gas spreading on wall break. Etc.
* More work
* Remove atmoschem, add "performant" gas overlays
* what the fuck git
* More work I guess?
* Fix stuff, create a few (empty) components for future work
* Fix temperature
* Fix tile air sharing
* Atmos optimizations
* Further atmos optimizations
* Even more optimizations!
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Update Content.Client/GameObjects/EntitySystems/GasTileOverlaySystem.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Address a few reviews
* Oops, forgot to remove this
* Update Content.Server/Atmos/AtmosphereMap.cs
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* Fix compile
* Improved client gas tile overlays
* Less allocations
* Even less allocations!
* some stuff dunno
* Big refactor time, oh yeah
* it truly is 1 AM
* bruh
* No idea why now it doesn't work.
Oh well! I'll fix this on thursday :relieved:
* Basic atmos serialization
* Fix bugs, add VV attributes
* Start adding stuff for gas reactions
* Add a few atmos commands
* Fill gas command
* Changes to gas opacity
* Fixes I guess
* Fixes, add space wind sound
* High pressure movement!
* Better high pressure movements.
* Fix direction, maybe?
* And now it works great
* Science!
* and this is why you don't trust people
* remove logging
* Turns out I'm fucking dumb
* Work on hotspots and reactions, add tritium gas
* IGridAtmosphereComponent interface! For future unsimulated grids.
* Makes atmos updates NoGC.
* C E A S E
* Add settemp atmos command
* Important reminder.
* Remove useless AtmosCooldown.
* More work on hotspots
* Overlays for hotspots. Fire works!
* Turns out I suck at coding
* Fire texture change
* Yeah let's make that an absolute value, hmm?
* Support for atmos after teleporting grid (more or less)
* fix attempt (doesn't actually fix it)
* Make static variable not static
* Remove magic numbers
* Stopwatch moment
* Slight cleanup.
* More cleanup.
* Atmos optimizations
* Fix build
* Remove useless ghost atmos shit
* Adds CanSeeGases component for gas overlay stuff
* Component and prototype ignores
* ExcitedGroups now dispose on being merged with others
* Some tweaking.
* Atmos now uses frame time for updates.
* Nullable boogaloo
* IExamine fix
* Fix build
* Fix restartround
* Atmos tweaking, use invalid direction
* Increase high pressure movement force
* Better sort
* Update submodule.
* NULLABILITY AAAAH
Special thanks to monster860 and all monstermos contributors!
Co-authored-by: Campbell Suter <znix@znix.xyz>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
Co-authored-by: ComicIronic <comicironic@gmail.com>
Co-authored-by: silicons <2003111+silicons@users.noreply.github.com>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
2020-08-02 20:08:20 +02:00
|
|
|
|
}
|
|
|
|
|
|
}
|
|
|
|
|
|
}
|